$89.99 $149.99 40% Off
Profile's T2 Wing has a winged cross-section to slice through the air, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the T2 is super light and boasts a wide clamping section that will accept any Profile clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability.
The Aeria Evo maintains the aerodynamics of the original version but increases the ability for the rider to get into their best possible position. The expanded fit range and tilt capability make it a class leader for adjustment and position optimisation. Specifications - The Aeria Evo is an update of our well proven Aeria bar. We have evolved the fit range of the bar with new brackets, armrests and extensions. - The new brackets add the ability to tilt the entire assembly, as well as letting the armrests - go much narrower than the first generation design. - A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The new Ergo armrests increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. - The bracket can be tilted by up to 10 degrees. - There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1700 possible configurations of Reach, Stack and Pad Width. Adding in the tilt factor magnifies this adjustment range even further. - All hardware and component pieces were not only designed for performance and ease of use but also strength. - Basebar Width: 42cm (Center-to-Center) - Basebar: Carbon - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments) - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 340mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 809g
This is an aerobar defined by fit. Unlike aerobars of the past that had their fit and adjustability range restricted by design and construction, the Aeria Ultimate places fit first. The Aeria Ultimate is a durable, low profile carbon aerobar designed with an expandable adjustability range and custom fit for the ideal TT setup for each individual rider’s body type. It features an extensive range of independent adjustment of reach and width in the smallest increments, stack adjustment with lowest stack available without extensions placed below the basebar, and built-in tilt adjustment of the integrated bracket allowing the armrests to be rotated separately from the extensions without adding stack height. - Reach adjustment range: Increments of 7.5mm with range of 92mm fore/aft - Adjustable stack of 25 to 105mm in 5mm increments to achieve the same pad stack as aerobars with extensions placed below the basebar - All dimensional adjustments are independent of each other to achieve desired fit with no need to calculate adjustments in order to make changes - Tilt adjustment is built into the pad/extension bracket with a range up to 15 degrees - rotating the armrests separate from the extensions improves overall aerodynamics without raising stack height - Includes F-40 Armrest with offset bolt pattern featuring nine times fore/aft positioning with 67.5mm adjustment range, 18,5mm width adjustment between position, and 15 degrees rotational adjustment - Stem sold separately Tech specs: - Bracket: Aeria Ultimate Forged - Stack: 25mm to 105mm (5mm Increments) - Reach: -21mm to 92mm (7.5mm Increments) - Width: 125mm to 252mm (18.5mm Increments) - Extension Length Adjustment: 230mm to 337mm (Center of Basebar to Tip) - Extension Length: 378mm - Extension Height: 71mm - Extension Angle: 30° (For T4+ Carbon) - Bracket Tilt Adjustment: 0-15° - Weight: 910g (without stem or armrest risers)
Profile's Ozero Base Bar boasts superior aerodynamics thanks to its slippery hydroformed shape. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Ozero puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
The aero wing section on Profile's full carbon Svet R Carbon Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Svet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
The Svet TT was designed for Time Trial and Triathlon usage and features a sleek UCI compliant 3:1 wing. Strategic cable slot positioning enables streamlined internal compatibility for electronic or mechanical shifting cable management while the zero drop and upturn brake extensions provide better positioning for climbing and cornering while in the pursuits. - Weight: 210g (42cm) - Width: 44cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 165mm (center to tip) - Pursuit Drop: 0mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
The Alumin X gives you a great aero position. Profile's 7075-T6-aluminum wing bars are coupled with carbon aero extensions for a perfect combination of function and value. Internal cable routing keeps the set-up clean. Shot peened and anodized for extra strength and durability, the Alumin X is the perfect upgrade for triathlons and time trails.
Page 1 of 1