Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Handlebars

Vision Aluminum Base Bar
$60.00 - $132.00
Vision's Aluminum Base Bar is made of triple-butted 6066 T6 aluminum for excellent stiffness and lightness, plus it boasts fully internal cable routing to keeps things slippery and low-drag. The wide 31.8mm clamp section has more than enough real estate for your preferred aero bar extensions and arm pads (sold separately).
Vision Carbon Pro Clip-On Aerobar (26.0mm)
Vision's Carbon Pro Clip-On Aerobar is just the advantage you need to take seconds or even minutes off your bike split. Carbon-fiber extensions make these extensions extremely lightweight. And the internal cable routing allows for a complete aero set-up. Plus, the 6-position carbon-fiber armrests feature thick pads for comfort and provide plentiful adjustment choices for a great fit.
Velo Orange Milan Handlebar
$49.99
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
TruVativ CoLab 35mm Aluminum Handlebar
$103.99 - $130.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)
TruVativ Descendant 35mm DH Handlebar
$86.99 - $95.99
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°
TruVativ Descendant Carbon Flat Handlebar
$204.99
Uncompromising control and unflinching style. Based on the width of Enduro superstar Jerome Clementz, the Descendant carbon flat bars bring comfort and control to riders seeking the aggressive position a flat bar offers. Descendant series bars are the new benchmark for control and comfort. - Material: Carbon fiber - Width: 750mm - Backsweep: 7-degrees - Bar Clamp Diameter: 31.8mm - Colors: Black
TruVativ Descendant Carbon Riser Handlebar
$204.99
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the Carbon Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Carbon fiber - Width: 750mm - Backsweep: 7 degrees - Bar Clamp Diameter: 31.8mm - Rise: 20mm - Upsweep: 5 degrees - Colors: Black
TruVativ Descendant Carbon Riser Handlebar
$213.99
With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection
TruVativ Descendant CoLab Series Kyle Strait DH Riser Bar
$109.99
The Truvativ CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style - and to enhance each rider's cockpit interface. - Kyle Strait signature Eagle graphics - 808 millimeters wide for strength and leverage - Upsweep: 5 - Material: Aluminum
TruVativ Descendant CoLab Series Martin Soderstrom DH Riser Bar
$109.99
The Truvativ CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style - and to enhance each rider's cockpit interface. - Martin Soderstrom signature clean design with a reminder of his country’s colors and the dates and locations of his biggest crashes - Upsweep: 5 - Material: Aluminum
TruVativ Descendant Downhill Carbon Riser Handlebar
$232.99 - $243.99
With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection
TruVativ Descendant Downhill Riser Handlebar
$98.99
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
TruVativ Descendant Riser Handlebar
$89.99
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
TruVativ Descendant Troy Lee Design Handlebar
$135.99
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum
TruVativ Hussefelt Comp Riserbar
$47.99
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ Hussefelt Riserbar
$57.99 - $62.99
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ Stylo T20 Flatbar
$31.99
TruVativ's Stylo T20 Flatbar is made from butted aluminum for low weight and high strength. At 600mm wide, it gives you a nice XC width without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
TruVativ Stylo T20 Riserbar
$41.99
TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
TruVativ Stylo T30 Riserbar
$58.99
TruVativ's Stylo T30 Riserbar will have you taking on climbs and descents like a champ. This butted aluminum bar is 700mm wide, to give you enough leverage to muscle your rig without weighing you down. And, the multiple rise options let you choose the perfect upright position for greater control in technical sections.
Thomson Carbon Road Handlebars
$329.99
Thomson's Carbon Road Handlebars are as light, stiff and strong as they are beautiful. Thomson crafts them of three types of unidirectional Toray carbon, molding them in one piece and putting a mild wing shape on top for a nice platform and support for your hands. And you get the perfect bend for riding in all hand positions with plenty of clearance for your wrists at any bar angle. Plus, there are provisions on the bottom for the cables so you get a tidy tape job and even more comfort.
Thomson Cyclocross Carbon Handlebar
$329.99
For cyclocross, Thomson presents the Katie Compton Signature ‘cross bar. Katie brings her multiple championships, European racing, and Olympic experience to give you a bar built her way for ‘cross. It’s the natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. This is the carbon fiber cyclocross handlebar built to take all the season can dish out. Certified to EN, tested to DIN+.
Thomson MTB Aluminum Downhill Handlebars
$145.99
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
Thomson MTB Carbon Cross Country Handlebar
$199.99
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Thomson MTB Carbon Trail Handlebar
$199.99
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Profile Design ADL Aluminum Aerobar
$156.99
ADL Aerobars are adjustable with an integrated bracket design. They can be flipped in either left or right direction to use with or without armrests. - Clamp style and three position F-35i injected armrest provide and adjustable road specific fit - Fits both 26.0 and 31.8mm basebars, shims included - Stack: 37mm-97mm - Armrest adjustment 20mm fore/aft - Reach: -60mm, -40mm, -30mm - Extension Adjustment: Fixed - Width: 165mm-320mm (center to center) - Weight: 420g
Profile Design Aeria Ultimate Wing Carbon Aerobar
$1,627.99
This is an aerobar defined by fit. Unlike aerobars of the past that had their fit and adjustability range restricted by design and construction, the Aeria Ultimate places fit first. The Aeria Ultimate is a durable, low profile carbon aerobar designed with an expandable adjustability range and custom fit for the ideal TT setup for each individual rider’s body type. It features an extensive range of independent adjustment of reach and width in the smallest increments, stack adjustment with lowest stack available without extensions placed below the basebar, and built-in tilt adjustment of the integrated bracket allowing the armrests to be rotated separately from the extensions without adding stack height. - Reach adjustment range: Increments of 7.5mm with range of 92mm fore/aft - Adjustable stack of 25 to 105mm in 5mm increments to achieve the same pad stack as aerobars with extensions placed below the basebar - All dimensional adjustments are independent of each other to achieve desired fit with no need to calculate adjustments in order to make changes - Tilt adjustment is built into the pad/extension bracket with a range up to 15 degrees - rotating the armrests separate from the extensions improves overall aerodynamics without raising stack height - Includes F-40 Armrest with offset bolt pattern featuring nine times fore/aft positioning with 67.5mm adjustment range, 18,5mm width adjustment between position, and 15 degrees rotational adjustment - Stem sold separately Tech specs: - Bracket: Aeria Ultimate Forged - Stack: 25mm to 105mm (5mm Increments) - Reach: -21mm to 92mm (7.5mm Increments) - Width: 125mm to 252mm (18.5mm Increments) - Extension Length Adjustment: 230mm to 337mm (Center of Basebar to Tip) - Extension Length: 378mm - Extension Height: 71mm - Extension Angle: 30° (For T4+ Carbon) - Bracket Tilt Adjustment: 0-15° - Weight: 910g (without stem or armrest risers)
Profile Design Aeria Wing Aero Bars
$578.99
When you're in it to win it, you need Profile Design's Aeria Wing Aero Bars! Designed for maximum aerodynamics, amazing adjustability and superior handling, this beautiful front end sets a new standard. For the ideal blend of power, control and aerodynamics it boasts Profile's high-modulus carbon wing base bar with ergonomic grips, stackable risers for fine-tuning armrest and extension height, their F25 armrests that can be rotated and moved fore/aft, and their T2+ carbon extensions that also are fully adjustable. This all means that you can dial in the ultimate fit to fly down the road and change it as you get stronger, more flexible and even faster! Plus, the carbon construction means lightness and stiffness for excellent support and handling when you're hammering along setting a new PR. And, to make your bike cheat the wind even more you also get multiple drillings for internal cable routing and electronic Di2 compatibility.
Profile Design Airstryke Clip-on Aerobars
$245.99
Profile Design's Airstrykes are so quick your competition won't know what hit them! Grab these light aluminum bars, get in a comfy, aero tuck and you’ll fly faster with the same effort. Plus, the spring-loaded F-19 arm rests rotate up so you can quickly and easily access a comfortable climbing position. With these versatile bars your PRs don't stand a chance! Plus, the Airstrykes fit most handlebars thanks to Profile's ingenious Multi-Fit System.
Profile Design Airwing OS Base Bar (31.8mm)
$86.99
The Airwing has a deep drop to keep you in a wind-cheating aero tuck, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the Airwing is super light and boasts a wide clamping section that will accept any Profile Design clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability and pre-drilled for internal cable routing for aerodynamics and a clean look.
Profile Design Alumin X Aerobar Handlebars
The Alumin X gives you a great aero position. Profile's 7075-T6-aluminum wing bars are coupled with carbon aero extensions for a perfect combination of function and value. Internal cable routing keeps the set-up clean. Shot peened and anodized for extra strength and durability, the Alumin X is the perfect upgrade for triathlons and time trails.
Page 1 of 4 Next page