Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Cassettes/Freewheels

Wolf Tooth Components 42T GC Cog for SRAM
$139.99
The product that set the standard and still the best available! The GC line of cassette extender cogs allow you to modify your 10-speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette so always select the correct type for the cassette brand you have. Compatibility: - Compatible with SRAM 10-speed cassettes listed on the GC tech page - Compatible with all 10-speed chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Compatible with all 10 speed rear derailleurs except non-clutch type SRAM rear derailleurs model year 2012 and older - These older rear derailleurs do work with the GC40. - Can be run in 2x configuration with a long cage rear derailleur - These may fit tightly on some over-sized hub bodies such as Stan's No Tubes 3.30 and the Easton X4 hubs. With a little filing and some grease they will go on.
Wolf Tooth Components Alloy Singlespeed Cog
$67.99 - $75.99
Light, strong with extra tall teeth, the Wolf Tooth Aluminum Single Speed Cog is a lightweight option for single speed cogs that's offered in a variety of sizes. - Wide 4.5mm base won't dig into your freehub - Made of 7075 Aluminum Alloy for durability and lightness - Made in the USA
Wolf Tooth Components Giant Cog
$140.99
- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Shimano Alfine Sprocket
$18.99
- Special single gear design with chain tensioner - Revised tooth profile to prevent chain skip - MODEL NO: CS-S500 - SERIES: SHIMANO ALFINE S7000/S700 Series - Gear thickness (mm): 2.0 - Recommended chain: Super Narrow HG for 9-speed
Shimano Dura-Ace R9100 11-Speed Cog Spacer
$6.99
Shimano Dura-Ace R9100 Cassette Spacers
Shimano Ultegra 10-Speed Cassette
$109.99
Shimano's Ultegra 10-Speed Cassette delivers pro-level shifting and durability. The computer-enhanced tooth shapes and tough cogs mean you can shift quickly, precisely and smoothly even under pressure.
Shimano XTR 11-Speed Cassette
$434.99
• Four carbon carriers and six titanium cogs for reduced weight • Nickel-plated finish for corrosion and wear resistance • Dyna-sys 11-speed cassette with "Rhythm step" gearing for closer gear ratios and smoother shifting performance • Fits Dyna-sys 11 and current Shimano 9/10-Speed MTB hubs • The largest cog (40t) is positioned inboard and above the drive-side flange • Hubs with tall drive-side flanges may not be compatible due to spoke interference • Range: 11-40
Previous page Page 2 of 2