Filter By:
Cables

$9.99
Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.

$4.99
Fittings for Jagwire hydraulic hose.
- Compression Nut to install Jagwire hydraulic hose with SRAM brakes
- M8-0.75 Thread, 15mm Length

$2.39
Basics brake cables provide value on a budget.
- Double ended for compatibility with SRAM/Shimano road and mountain brakes
- Pre-stretched
- Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain
- Color: Silver
- Diameter: 1.6mm
- Length: 2795mm

$14.99
DIY Kit Includes:
- Housing and Brake Cable
- End caps and cable tips
- Compatible Shimano/Sram

$3.99 - $31.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

$1.99
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

$1.99
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

$7.99 - $88.99
Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

$3.59
Fittings for Jagwire hydraulic hose.
- Compression bushings (olives) to install Jagwire hydraulic hose with SRAM StealthamaJig type brake levers

$3.09
Fittings for Jagwire hydraulic hose.
- Needle inserts to install Jagwire hydraulic hose with SRAM StealthamaJig type brake levers
- Torx T8 drive

$14.99
DIY Kit Includes:
- Housing and Shift Cable
- End caps and cable tips
- Compatible Shimano/SRAM
Specs:
- Cable Material: Galvanized
- Intended Use: Road/MTB
- Cables & Housing Comp: Shimano/SRAM
- Housing Length: 2000mm

$4.99
Fittings for Jagwire hydraulic hose.
- Compression Nut to install Jagwire hydraulic hose with Shimano brakes
- M8-0.75 Thread, 18.8mm Length

$1.59
Fittings for Jagwire hydraulic hose.
- Needle inserts to install Jagwire hydraulic hose with Shimano "low-pressure" type brakes
- Compatible with Shimano "J-Type" and older brake models

$3.59
Fittings for Jagwire hydraulic hose.
- Compression bushings (olives) to install Jagwire hydraulic hose with Shimano disc brakes

$4.89 - $14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation

$4.89 - $14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

$59.99
With more disc brake platforms on the market than ever before, fitting hydraulic hoses can be complex and frustrating. That’s why we developed the Quick-Fit Hydraulic Hose adapter system, a foolproof approach utilizing proven caliper-adapter technology from the motorcycle world. Pro universal hoses makes it safe and easy to dial in a perfect fit.
Simply select a Pro hydraulic hose and match it with a compatible Mountain Pro Quick-Fit adapter kit. It’s that easy. Pro Hydraulic Hoses come in a wide array of colors. Pro Quick-Fit adapter kits are available separately in convenient packaging for the most popular brake manufacturers and models.
- A Kevlar weave surrounding the liner prevents bulges due to heat buildup and extreme pressure
- Each hose has 2 caliper-side universal couplers that connect to the Quick-Fit Adapters (sold separately)
- Mountain Pro hydraulic hose kits are available in 12 colors and finishes
- Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos

$12.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance.
Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance.
- Polished stainless steel construction for low friction
- Compatible with all performance housing and lubricants
- Cables are tinted gold for easy identification

$65.99
Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

$1.99
Jagwire's Cable Guide Stoppers are quality aluminum adapters that let you convert open-style cable housing stops on your bicycle frame so that they will hold 5mm-diameter standard cable housing sections.

$2.99
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments.

$47.99 - $59.99
Mountain Pro kits offer both enhanced performance and style. But unlike Road Pro Kits, shift and brake systems are sold separately. Teflon-coated cables used with our Slick-Lube liners dramatically reduce friction while compressionless shift housing delivers smooth, precise shifting performance. And, with all the needed parts included, our Mountain Pro kits are easy to install.
- Teflon-coated cables, Slick-Lube liners, and compressionless housing enhance performance
- Designed to keep gunk out - enough housing for continuous runs, including seal liners if a bike has stops
- A step above standard OEM cables and housing
- Mountain Pro Shift kits are available in colors that match Jagwire Mountain Pro hydraulic hose kits
What's Included:
1 3200mm LEX-SL Shift Housing
1 1500mm Teflon-Coated Front Shift Inner Cable
1 2300mm Teflon-Coated Rear Shift Inner Cable
3 Sealed Alloy End Caps
6 Lined Alloy End Caps
2 Hooded Alloy End Caps
2 Cable Tips
2 4G Tube Tops
6 Cable Donuts
2 Rotating Hooks
1 2100mm Sealing Liner

$1.99
Frame mounted barrel adjusters allow cable tension to be easily fine tuned.
- Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch
- Bag of 10

$1.99
Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

$0.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible.
Page 1 of 1