A tough, tubeless-compatible 29-inch disc wheel in traditional non-boost thru-axle spacing. - Pinned construction double-wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless construction - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech thru-axle alloy 6-Bolt hubs w/serviceable cup and cone bearings - 6-Bolt disc compatible only - Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1110g

- Aheadset preload adjusting bolt

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Perfect for your road, touring or cross bike, Avid's BB5 Road brakes have all the power you need. Used with your road-style levers, they sport precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No

Perfect for your road, touring and cross bike, Avid's BB7 Road brakes have all the power you need. Used with your road-style levers, they provide precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.

Avid's BB7 MTN S Mechanical Disc Brake delivers with power, control, and a sleek black anodized finish that makes this brake look as fast as you feel. You'll love the simple cable pull system that's optimized for linear-pull levers. Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition. This brake kit includes an HS1 rotor for solid stopping power.

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapters are available as "left" or "right" side for Shimano brake levers and you can also flip sides if you prefer a certain more inward or outward remote position: Compatible brakes: - Deore BL-M6100/6120 - SLX BL-M7100/7120 - XT BL-M8100/8120 - XTR BL-M9100/9120 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec II brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers with Shimano brakes. Our BikeYoke I-Spec II adapters are available as "left" or "right" for Shimano brake levers but you can also flip sides if you prefer a more inward or outward remote position: Compatible brakes: - Deore BL-M6000 - Deore BL-501 - SLX BL-M7000 - XT BL-M8000/8020 - XTR BL-M 9000/9020 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec B brake and saves an extra clamp on the handlebars. They can also be used to mate SRAM triggers or other remotes with Shimano brakes. Left and right + flip-flop compatible. Compatible brakes: - SLX BL-M675-B - XT BL-M785-B - Zee BL-M640-B - Saint BL-M820-B Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

We never just want to make something, that´s already there. We want to make something different, something better. Featuring a classy and costly CNC-Finish and a wonderful Titanium bolt, Squeezy is not just light with 7.9g @ 34.9/35mm. Unlike other seat clamps, Squeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seat tube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seat tube and smoothly secures your seatpost in place. Compact design and the Titanium Torx T-25 bolt placed as close to the seat tube as possible allow even distribution of loads and dropper posts in particular can benefit greatly from smooth load distribution. 3 "Slip-Stopps" prevent Squeezy sliding down the seat tube during installation. Squeezy is available in various diameters to fit the most common seat-tubes. Please note, that this dimension refers to the seat-tube outer diameter and NOT to the seatpost specification. - 31.8mm - 34.9/35mm Features - extremely low weight: 7g (31.8mm) - material: Al-7075-T6, fine-feed CNC finish - collar-less design for more even clamping force distribution - Ti-6Al-4V titanium-clamping bolts Torx T-25 drive (please note, that Squeezies from first batch had T-20 bolts, but we figured, that was not a very smart choice) - "Slip-Stopp" installation aids

Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting", because the rear derailleur is not able to react smoothly to the trigger´s action, since the shifting cable can not move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra low friction, even when playing in the dirt. Weight of Shifty pulley: 6.3g Every Shifty now comes with a bolt and axle kit, which allows installation of our Shifty on the popular GX Eagle and NX Eagle rear derailleurs, which normally use a riveted connection, instead of the bolt-on solution of the higher spec derailleurs. You just need to remove the original rivet and replace them with our bolt and axle. Shifty fits following rear derailleurs: - XX1 - XX1 Eagle - X01 - X01 Eagle - X01 DH - X1 - GX1 - GX Eagle* - EX1 - NX* - NX Eagle* For rear derailleurs marked with *, you will need to remove the original rivet and replace it with the bolt and axle from the BikeYoke Shifty kit. 1 Set Shifty includes: - 1x Shifty pulley - 6061-T6 aluminium, anodized - 1x axle - 1x bolt

Many dropper posts feature remotes, that do not live up to a standard, that you would expect, when paying a lot of money for a dropper post. Even the most expensive droppers out there often come with remotes, that have ridiculous play, are made from plastic, bulky, heavy, or just do not function as they could. We put a lot of time and testing into the design of a remote lever that fulfils everything we want to see in a remote for dropper posts and since its introduction it has proven to be a favourite of many pro-riders and testers. Features: - Super lightweight (24g without clamp) - Made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved - You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp - Exceptional finish and touch - Individual mounting points to adjust position - Integrated cable tensioner - 12.5 mm of maximum cable pull 1 set Triggy includes: - Remote lever unit (black anodized and laser engraved aluminum body and lever with cable tension adjuster) - Shift cable - Shift cable endcap - 1x "Splits" clamp or I-Spec adapter (optional)

Choose our 2X remote for your dropper if you don't have enough space for a Triggy under your left side handle bar, for example if you are still running 2-by or 3-by shifting with front derailleur or if you have anoter remote for suspension or e-support. It also features a hinged clamp, that allows snapping your remote onto your handlebars without having to take off grips or brake levers. The clamp is made from a high-tech plastic compound and aluminium. The paddle itself is made from 6061-T6 aluminum, black anodized and finished with a dark anodized BikeYoke logo. Allowing a maximum of 10mm cable pull our 2X is compatible with any known dropper post on the market. The cable/wire is clamped via screw on the lever itself.

Triggy Alpha - The name speaks for itself - the new pack leader of dropper remotes. Since the beginning our Triggy has proven to be a favourite among many many pro riders and testers but with Triggy Alpha we have now set the bar even higher and we confidently say: There is no better remote on the market. The video is pretty much explaining very well what makes Triggy Alpha stand out amongst others: - Ball bearing on the paddle - Angle-adjustable paddle - Black anodized aluminum body and paddle with laser engraved finish - 2 available paddle lengths for crisp or soft dropper engagement - 2 mounting holes - Integrated cable tensioner - Direct mount for almost any brake available (see mounting options) - New cable clamping for universal dropper compatibility - Extremely low weight: 32g/34g (short/long) - Maximum cable pull: 11 mm The short version mimics our proven original Triggy paddle geometry. The long variant features a 7mm longer paddle and reduces the required forces by about 15%. Triggy Alpha is compatible with any commonly available aftermarket cable-actuated dropper post on the market. 1 set Triggy Alpha includes: - 1x Triggy Alpha remote (short or long) - 1x shift cable - 1x wire endcap - 1x BikeYoke Splits Clamp or I-Spec Adapter (optional)

Well, what's to say about our new DIVINE SL? It is simply the lightest production dropper post in the world with a total length of 400mm and 80mm infinite drop. Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we've modified the internals to work perfectly with the shorter travel. Of course, you can mount and use your DIVINE SL also on bikes outside the XC department. However, the DIVINE SL was specifically designed in respect of XC riders' requirements. One of the features, is the "Tech-Climb" feature. While our DIVINE SL is completely locked in place in the top-out and bottom-out position for consistent riding position, the post can slightly spring in the middle positions. We've found out, that extremely steep and technical (e.g. rooty or rocky) uphill sections can be conquered with much more ease, when the saddle is just slightly dropped (lets say about 1-2cm). Having the saddle dropped just a bit (and not completely), the "Tech-Climb" feature" also adds some suspension to the post, filtering the impacts of roots and rocks. Back fully extended or fully dropped, the post is rigid again. Titanium saddle bolts, carbon and oval rail compatible forged clamping plates, tapered tubes. All of this comes stock on the DIVINE SL to achieve a sensational low weight of 395g (30.9/400mm). Another unique feature of our DIVINE SL: - You can easily cut it to a short as 283mm, if you can spare the extra length with your frame and saddle height. The cut weight can go to a minimum of 345g! - The shorter travel allows the DIVINE SL to come with a design, that doesn't require manual resets like the REVIVE. Of course, our DIVINE SL requires internal routing of the cable through your frame. 1 set DIVINE dropper post includes: - 1x DIVINE SL Seatpost - 1x cable housing 1500mm - 1x Inner wire 1700mm - 2x housing Endcap - 1x remote (optional) - 1x Bike Yoke I-spec adapter or Splits-clamp (optional)

3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family. Noteworthy updates of the REVIVE 2.0 include: - One piece 3D-forged upper tube unit for improved stiffness and strength - Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance - CNC-finished actuation lever for even smoother engagement - New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)

Our award-winning REVIVE is also available as an oversized version for 34.9mm seattubes. Not only the lower tube diameter increased to 34.9, but also the stanchion tube grew form 25mm to 28mm. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strenght and stiffness at the same time. This is unrivaled by the competition. Optimized wall thickness and materials keep the weight extremely low and so our REVIVE MAX weighs in lower than some "regular" sized posts of the competition. Let´s see, what´s special about our REVIVE posts: What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth, … And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first: Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)

EX-1 Disc Quick Release replacement compatible with Expedition 1 Disc Rack.

This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.

- CNC machined 7075-T6 aluminum with modified shift gates and special profiles to allow flawless shifting with 9sp and 10sp drivetrains - Middle and outer chainrings have strategically-placed stainless steel pins to further enhance shifting - 5mm thick middle ring, 4mm thick outer ring - Anodized black with laser-etched graphics

- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum

- Alloy cable ends - For 1.2mm to 1.6mm cables - Silver

• Allows riders to connect seat packs to the Bontrager Nebula Plus saddles with flex form technology • Plastic