Filter By:
- Bottom Brackets (60)
- Brakes/Levers/Pads (233)
- Cables (63)
- Cassettes/Freewheels (50)
- Chainrings (146)
- Cranksets (114)
- Derailleurs (139)
- Forks (29)
- Show More Categories
- Handlebar Grips/Tape (114)
- Handlebars (87)
- Headsets (86)
- Pedals (77)
- Saddles (83)
- Seatposts (41)
- Shift/Brake Combinations (52)
- Shifters (72)
- Shocks (25)
- Stems (61)
- Tires/Tubes (547)
- Wheels (463)
- Other (376)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$60.00 - $99.99
$69.99 - $99.99
Up to 33% Off
Good looks and great design are abundant in 3T's ARX Pro stem. It's made of forged aluminum for light weight and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure 4-bolt faceplate.

$60.99
3T's Straight Aero Extensions are made of durable, stiff aluminum and feature no bends for an ultra low position during your time against the clock.
- Standard 22.2-mm diameter
- 305mm maximum extension from center line of bar clamp

$72.99
- Use in conjunction with Clip-On Team or Pro Aerobar base units
- Aluminum extension pair with 22.2mm diameter
- 305mm maximum extension from centerline of bar clamp

$74.99
3T's S-Bend Aero Extensions are made of durable, stiff aluminum and feature ergonomic bends to keep your wrists comfortable during your time against the clock.
- Standard 22.2-mm diameter
- 305mm maximum extension from center line of bar clamp

$104.99
Riser kit comprises risers (2 x 10mm, 2 x 20mm), conversion plates, and bolts for Brezza II, to adjust armrest and extension height by 10mm, 20mm, or 30mm.
- Material: Alloy
- Bolts: Steel

$104.99
Riser kit comprises risers (2 x 60mm), conversion plates, and bolts for Brezza II, to adjust armrest and extension height by 60mm.

$120.99
3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate.
- Aluminum stem with 40mm stack height
- Single M6 bolt clamps stem to fork steerer
- T25 bolts on bar clamp
- 120 grams for 110mm
- Bar Clamp Diameter: 31.8 mm
- S.H.I.S. Stem Clamp Diameter: 28.6mm
- Weight: 120 grams (110mm)

$122.99
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.

$131.99
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.

$148.99
Zero25 is a lightweight, universal seatpost with a twist: it's two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that's needed is to flip the clamps from one side of the seatpost head to the other and the offset changes.
No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use—it now takes 30 seconds to transform your seatpost. And, the best news is that, despite the double functionality, the Zero25 is even lighter than our previous seatpost.
Zero25 Pro has an alloy pillar and is 350mm long.

$150.99
3T started life as a master dropbar manufacturer. Nobody else had the same technical ability to manipulate tubing, and thus 3T became the first company to focus on more ergonomic (i.e. more complex) shapes. That focus continues to this day, now with the complete shape freedom of carbon. The previous generation, the Ergonova, was lauded worldwide as the top ergonomic bar, in fact it was so good we didn’t touch the center section at all when designing the new SuperErgo. We did change everything else though, ensuring the SuperErgo will continue 3T’s streak as the ergo bar of choice for road cyclists from beginners to Team BMC and Team Aqua Blue.
- Material: Alloy 7050
- Cable routing: External cable grooves
- Stem torque: 5Nm maximum
- Shift/brake lever torque: 8Nm maximum
- Clip-ons: Compatible
- Di2 compatibility: Not compatible

$152.99
3T's Straight Aero Extensions are made of light, stiff carbon and feature no bends for an ultra low position during your time against the clock.
- Standard 22.2-mm diameter
- 305mm maximum extension from center line of bar clamp

$154.99
3T's Wrist Comfort Bend Aero Extensions are made of light, stiff carbon and feature large ergonomic bends to keep your wrists as comfortable as possible and ensure a sturdy grip during your time against the clock.
- Standard 22.2-mm diameter
- 305mm maximum extension from center line of bar clamp

$159.99
3T's S-Bend Aero Extensions are made of light, stiff carbon and feature ergonomic bends to keep your wrists comfortable during your time against the clock.
- Standard 22.2-mm diameter
- 305mm maximum extension from center line of bar clamp

$162.99
Comfort armrest set comprises pads and cradles and was original equipment on Ventus, use to upgrade Aura, Brezza II Team, and Mistral.

$162.99
Compact armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.

$374.99
Arx, Latin for stronghold and bridge, is 3T’s race-proven design for the perfect connection between fork and handlebar and suited to all cycling disciplines. Clamp design is optimized to ensure a secure fit on composite steerers and bars without the need for potentially damaging high torque values during assembly. 3T inhouse tests show Arx’s clamp by far exceeds the CEN standard, and also that it works very well with other brands of handlebar. Arx Ltd is the carbon-fiber version of the stem, with Ti bolts. Super-light and super-stiff, it is a highly evolved, modern design weighing just 118g.

$437.99
3T designed their endurance track racing handlebar, the Sphinx LTD, for off-the-front efforts. Shaping and aerodynamics are the themes here, with reinforced high-modulus carbon fiber used throughout to achieve awesome responsiveness and superior aerodynamics. The tops are aerodynamically shaped for a speed advantage on the boards. Your hands will love the specially shaped "wingtips" that give you an ergonomically efficient area to hold on to when you're taking a lap on the competition.

$439.99
Superleggera, the lightest 3T drop bar, ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers.
- Constant-taper center section & traditional round drops
- Weight: 186g
- Material: Unidirectional carbon
- Cable routing: Internal cable channels
- Stem torque: 5Nm maximum
- Shift/brake lever torque: 8Nm maximum
- Clip-ons: Not compatible
- Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

$471.99
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers.
- Constant-taper center section & traditional round drops
- Weight: 186g
- Material: Unidirectional carbon
- Cable routing: Internal cable channels
- Stem torque: 5Nm maximum
- Shift/brake lever torque: 8Nm maximum
- Clip-ons: Not compatible
- Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

$588.99
Since its introduction, the most common feedback on our Ergonova dropbar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics
- Material: Unidirectional carbon - ultralight layup
- Cable routing: Internal cable channels
- Stem torque: 5Nm maximum
- Shift/brake lever torque: 8Nm maximum
- Clip-ons: Not compatible
- Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

$649.99
Vola Team Stealth Essential is a lower-cost model of the award-winning Vola range. It's a complete starter package sharing the same architecture as Vola Team and based on the same 38cm-wide carbon fiber basebar. A super-low position favored by crono specialists is possible with extension clamps mounted on the underside of the basebar. Alternatively, extensions can be mounted above the basebar. Arm pad stack height above the stem centerline ranges from 30mm in the low position to 67mm in the top-mounted position. Width between the new comfort arm pads ranges 220–340mm, measured at pad outer edge. Arm pad reach can be set 20–70mm ahead of the basebar center, measured at pad front edge. Package includes alloy S-bend extensions, width extenders, and stiffness bridge. Riser kits, available as 3T spares, further raise stack height by up to 30mm. All-up weight of Vola Essential is just 700g. Finish with Team Stealth graphics.

$741.99
3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.

$846.99
The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact.
Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear:
- The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times
- It offers better grip and handling on tough descents, rough roads and sketchy turns
- It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars
- Wing material: Unidirectional carbon
- Extension material: Alloy
- Cradle material: Alloy
- Pad material: Neoprene
- Base bar width (c-c): 400mm
- Outside pad width: 240-340mm
- Center pad width: 130-230mm
- Pad stack: 30-97mm
- Pad reach: 20-70mm
- Grip inside reach: 72mm
- Grip drop: 46mm
- Clamp diameter: 31.8mm
- Extensions: S-bend
- Cradle: New comfort
- Weight: 770g (minimum stack)
- Finish: Stealth black or black with red accents

$999.99
Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero.
- Narrow, aero-optimized base bars are built with 3T's HM carbon, cutting weight by huge margins
- The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar
- Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position
- Width between the arm pads ranges 220—340mm, measured at pad outer edge
- Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge
- The arm pads rotate in their clamps
-A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp
- Carbon aero extensions
- Carbon base bars
- Carbon 3T Comfort Cradles with neoprene pads
- Weight: 750 grams in the "low position"
- UCI legal

$94.99
Conquer ice, conquer snow, conquer winter riding! Commuting to work or school on ice just got faster and easier with 45NRTH's Xerxes. 140 steel-carbide studs provide unrivaled control and durability, while the ultra-narrow profile easily slices through snow to provide extreme traction in every winter condition.

$174.99 - $316.99
From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super-tall side lugs dig into loose snow to provide predictable and confident cornering. It doesn't matter whether there's ice on the road ahead, the Wrathchild is available in both studded and non-studded models. Let Wrathchild bring out your inner-child and go carve up some local trails.

$4.99
A comprehensive patch kit for all puncture sizes.
- Contains 7 assorted patches, 1 metal buffer and 1 tube of rubber cement

$4.99 - $8.99
Our standard butyl innertube with a 0.9mm wall thickness represents excellent value-for-money and strikes a nice balance between weight and durability.
- S/V Schrader Valve (American Valve) with a 40mm valve length for trouble-free double wall rim compatibility
- 12 and 14 tubes use angled/shorter valves for improved pump head clearance/accessibility
- Easily identifiable from the GREEN color-coded box
- Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction
- All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged
- Low-lead nickel-plated valve with standard removable Schrader valve core
- Packaged individually (carton/box)

$5.99 - $6.49
Mounts at dropout to prevent derailleur damage.
- Cut-outs allow smooth cable routing
- Durable steel construction

$5.99
The ideal trail-side repair kit.
- Contains 6 patches, 1 metal buffer, 2 tire levers and 1 tube of rubber cement

$5.99
Ultra-strong 1 piece construction.
- Cut-out allows smooth cable routing for direct route derailleurs
- Compatible with nutted and quick-release axles
- Available in a variety of sizes to suit many types of bikes

$5.99 - $9.49
Our standard butyl innertube with a 0.9mm wall thickness represents excellent value-for-money and strikes a nice balance between weight and durability.
- P/V Presta valve (French valve) with 48/60/80mm length options for a wide range of rim depth compatibility
- Easily identifiable from the RED color-coded box
- Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction
- All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged
- Low-lead nickel-plated valve with a threaded valve and non-removable core
- Packaged individually (carton/box)

$9.99 - $12.99
Durable alloy construction
- Compatible with standard saddle-clamp assemblies
- 350mm length

$9.99
Strapless design for quick-and-easy entry and release.
- Improves power transfer for efficient pedaling and helps keep feet in correct position on pedals
- Durable nylon construction
- In-molded anti-slip tread pattern
- Includes mounting hardware
- 62g per pair

$10.99
Big vibration-dampening blocks offer comfort and enhanced grip.
- Diamond pattern inner ring provides enhanced control
- OD: 31mm
- Length: 130mm

$10.99
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes.
- Proportionally smaller platform size is perfect for smaller-sized feet
- Durable 7mm boron steel axle
- Loose ball bearing axle assembly
- Built-in reflectors included
- 9/16" / 1/2" axle options
- 300g per pair
- Dimensions: 93 x 87mm

$10.99
Gel rubber construction for the optimum balance of comfort and durability.
- Diamond pattern provides excellent grip

$14.99
A simplified quick release, utilizing an exposed/external split cam that straddles the end of the skewer.
- Lighter and both easier and less expensive to manufacture, these external cam quick release levers represent an excellent value
- Fits both road and mountain bike frames & forks with 100/130/135mm hub spacing
- Construction: Chromoly steel skewer with alloy cam/lever and plastic/steel acorn-nut
- Sold as a front & rear matching pair
- Lengths: 133mm (FR) / 169mm (RR)
- Weight: 58g (FR) / 64g (RR)

$15.99
Alloy shaft converts threaded forks to work with clamp on threadless Ahead-type stems.
- Fits all models of threadless stems with 1-1/8 steerer clamp

$20.99
Lightweight and durable 2D forged alloy stem.
- Removable faceplate for easy bar installation
- 4-bolt clamp for optimal handlebar support
- 7 degree rise

$20.99
Lightweight and durable alloy flat bar.
- 5-degree upsweep and 9-degree backsweep for optimal riding comfort
- 600mm width

$21.99
Gel rubber construction for the optimum balance of comfort and durability.
- Medium-profile diamond pattern provides excellent grip
- Dual lock-on clamps for maximum security
- OD: 31mm
- Length: 130mm

$21.99
Gel rubber construction for the optimum balance of comfort and durability.
- Waffle grip pattern provides excellent grip and vibration dampening
- Flange provides added contact enhancing control
- Flange cut-away provides shifter and thumb clearance
- OD: 30mm
- Length: 135mm
Page 1 of 49
Next page