Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Yuba Boda Foot Pegs
$49.99
Yuba's Boda Foot Pegs are sturdy metal supports that give smaller passengers a secure place for their feet. Since they're adjustable they can be used for different-sized riders, and moved to fit as your passengers grow.
Wolf Tooth Components 40T GC Cog for Shimano
The GC line of cassette extender cogs allow you to modify your 10 speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassettes. Compatibility: - Compatible with Shimano 10 speed cassettes - Compatible with all 10 speed rear derailleurs and chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Can be run in 2x configuration with a long cage rear derailleur - These fit very tight on certain Stan's No Tubes hubs like the 3.30 and the Easton X4 hubs. With a little filing and some grease they will go on.
Wolf Tooth Components 25mm B-Screw
$1.49
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Wolf Tooth Components 16 Tooth Cog
$16.00
We did our homework on this cog and we think you will be pleased with the result! This 16t cog smooths out the cog to cog transition when using our GC and a standard 10 speed 11-36 cassette. You should expect this to shift well and last as long as the rest of your cassette cogs of similar size. Here are the transitions WITHOUT the 16t cog (4 tooth max jump): - Remove the 15t -> 11-13-17-19.... - Remove the 17t -> 11-13-15-19... Here are the transitions WITH the 16t cog (3 tooth max jump): - Remove 15t & 17t-> 11-13-16-19... Compatibility: Shimano 10 speed cassettes - XT 11-36t (CS-M771) - XTR 11-36t (CS-M980) - Other 11-36t Shimano cassettes like SLX HG81 11-36t - Modification required (must drill out rivets holding the 17t to the larger cogs) SRAM 10 speed cassettes - PG 1030, 1050, and 1070 - 11-36 and 12-36 - X0 11-36t(XG - 1080) - Remove the 14t rather than the 17t
Wolf Tooth Components Ultralight Stem Cap With Integrated Spacer
$20.19
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.
Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$26.99 - $34.99
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Wolf Tooth Components Set of 4 Chainring Bolts for M8 Threaded Chainrings (10mm Long)
$27.29
Wolf Tooth designed these bolts to be the best on the market. They have a 4mm hex socket and are 10mm long so you can use a bash ring with your chainring that has threaded standoffs like the Wolf Tooth 104 BCD 30t ring, Elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings.
Wolf Tooth Components ReMount
$42.99 - $59.99
Offered in multiple sizes and applications, Wolf Tooth Components' ReMount places your dropper lever in a more ergonomic position tha allows you to keep a better grip on the bar while actuating your dropper post. - Available in standard 22.2mm diameter for MTB bars, as well as Shimano I-Spec A&B, I-Spec II, and SRAM MatchMaker options - Designed to work with cable-actuated dropper levers with pivots parallel to the handlebar's length - Allows a dropper post remote to be below the bar and on its side for better ergonomics
Wolf Tooth Components Set of 5 Chainring Bolts+Nuts For 1x
$43.49
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6 mm long so they work perfectly with any bolt-on single chainring that does not have threaded standoffs. - Design and manufactured in Minneapolis, MN USA - 7-8 NM tightening torque with light grease on threads only - Material - 7075-T6 aluminum - Weight - 5 bolts = 10 grams
Wolf Tooth Components CAMO Direct Mount Spider for Race Face Cinch
$44.99
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
Wolf Tooth Components CAMO Direct Mount Spider for SRAM
$44.99
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
Wolf Tooth Components 104 Bash Ring
$53.99
- Bash guard protects chainring from logs, rocks and other trail hazards - Designed and manufactured in the USA from 7075-T6 aluminum alloy - See wolftoothcycling.com for mounting tips - 51g (26-30t)
Wolf Tooth Components 64/104 Chainring
$84.99 - $99.99
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Cyclocross Chainring
$89.99 - $145.99
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Giant Cog
$96.00 - $140.99
- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components ReMote Dropper Post Lever
$115.99 - $135.99
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
Wolf Tooth Components Shimano M9000/M9020 Chainring
$115.99
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)
Wolf Tooth Components 5-Spoke GXP Direct Mount Ring
$125.99
Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$125.99
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components 110 BCD Cyclocross and Road Chainrings
$133.99 - $155.99
Wolf Tooth was first to the market with Cyclocross 1x specific chainrings because they saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on road applications with the giant 50t rings! Compatibility: - These rings are for use with 110 BCD 5 arm cranksets. Do NOT fit Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. - Stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 110 BCD Asymmetric 4-Bolt for Shimano Cranks
$136.99 - $155.99
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 42T GC Cog for SRAM
$139.99
The product that set the standard and still the best available! The GC line of cassette extender cogs allow you to modify your 10 speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette so always select the correct type for the cassette brand you have. Compatibility: - Compatible with SRAM 10 speed cassettes listed on the GC tech page - Compatible with all 10 speed chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Compatible with all 10 speed rear derailleurs except non-clutch type SRAM rear derailleurs model year 2012 and older - These older rear derailleurs do work with the GC40. - Can be run in 2x configuration with a long cage rear derailleur - These may fit tightly on some over-sized hub bodies such as Stan's No Tubes 3.30 and the Easton X4 hubs. With a little filing and some grease they will go on.
Wolf Tooth Components 42T GC Cog for Shimano
$139.99
The product that set the standard and still the best available! The GC line of cassette extender cogs allow you to modify your 10 speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette -- always select the correct type for the brand of cassette you have. Compatibility: - Compatible with Shimano 10 speed cassettes listed on the GC tech page - Compatible with all 10 speed chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Compatible with all 10 speed rear derailleurs except non-clutch type SRAM rear derailleurs model year 2012 and older - Can be run in 2x configuration with a long cage rear derailleur
Wolf Tooth Components 104 BCD Stainless Steel Chainrings
$168.99
416 stainless steel is not the first material choice for most component manufactures looking to use stainless steel (most use soft 300 series). That is because 416 is hard...hard because the raw billet is expensive, hard because it takes a long time to machine. However, that did not stop Wolf Tooth because there is no denying that it is the best material for those that need the ultimate durability in a chainring. These stainless steel chainrings are not only beautiful, but they will last 5-10 times longer than their aluminum versions. Compatibility: - These are functionally the same as the aluminum 104 BCD rings. - These rings fit any 104 BCD crankset. - 30t x 104 ring is the only Quarq power meter compatible 30t ring available. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes
White Lightning Saddle Johnny
$16.99
White Lightning's Saddle Johnny saves commuters and everyday riders from ever riding on a wet seat again. Anyone who has ever left their bike outside knows the cold and wet feeling of riding their bike after a storm. The Saddle Johnny protects your seat from the elements and you from a wet ride home. Made from a 100% waterproof and UV resistant material, the Saddle Johnny simply slips on and over your seat to protect it from rain, sleet and snow. It features built-in elastic for a tight fit and it fits road, mountain and hybrid seats. It also folds small to fit in any seat bag so it's always ready when you need it.
Wheelsmith Straight 14g (Silver) Spoke
$55.30
- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50
Wheelsmith Straight 14g (Black) Spoke
$73.56
- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50
Wheelsmith Double Butted 14/15/14g (Silver) Spoke
$78.70
- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50
Wheelsmith Double Butted 14/15/14g (Black) Spoke
$97.72
- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50
Wheels Manufacturing Inc. 386EVO Angular Contact Bottom Bracket
Threaded Angular Contact BB for 386EVO frames (86.5mm shell width, 46mm shell ID). Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB386EVO - Bottom Bracket Shell Width (mm): 86.5mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 124g - Packaged for retail display - Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters
Wheels Manufacturing Inc. Outer Axle Nut
$1.39 - $6.99
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Wheels Manufacturing Inc. Individual Chainring Spacer
$1.49 - $26.10
- For chain and derailleur alignment - 20 per bag
Wheels Manufacturing Inc. M8 Derailleur Hanger Bolt
$2.49
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench
Wheels Manufacturing Inc. Ball Bearing Retainer
$2.99 - $19.99
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Inc. Pedal Washer
$3.79
- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, Dependent on pedal thread length engagement
Wheels Manufacturing Inc. Presta Stem Saver
$3.99
- Shim adds support to presta stem used in a schrader rim
Wheels Manufacturing Inc. 7sp Cassette/8sp Body Spacer
$4.99
- Allows the use of a 7 speed shimano cassette on an 8 or 9 speed shimano cassette body
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.99
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Wheels Manufacturing Inc. Custom M6 Bolt Set for Derailleur Hanger
$4.99
Replacement M6 Short Nut/Bolt Set for Wheels Mfg. derailleur hangers. - Custom M6 short chainring bolt style fastener - Use with 4mm hex wrench - Length of bolt: 6.4mm under head - Length of Nut: 3.5mm (under head), 5.2mm (overall)
Wheels Manufacturing Inc. Chainstay Protector
$6.99
Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.
Wheels Manufacturing Inc. Chainstay Protector - Wide
$7.99
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Wheels Manufacturing Inc. Aluminum Headset Spacer
$8.49 - $25.99
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing Inc. Front Derailleur Spacer 1-1/8-inch
$9.99
This Wheels Manufacturing Shim lets you mount a 1-1/8-inch clamp front derailleur on a 1-inch seat tube.
Wheels Manufacturing Inc. Pedal Washers
$10.59
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Wheels Manufacturing Inc. M8 Bolt for DROPOUT-202
$10.99
M8 Bolt for DROPOUT-202 - Threads: M8x0.75 - Length Under Head: 1.050-inch - Head Diameter: 0.415-inch - Black anodized - Sold Individually - Made in the USA
Wheels Manufacturing Inc. Front Derailleur Spacer 1-1/4-inch
$11.99
This Wheels Manufacturing spacer allows you to mount a 1-1/4-inch clamp front derailleur on a 1-1/8-inch seat tube.
Wheels Manufacturing Inc. Grade 25 Loose Ball Bearings
$11.99 - $18.99
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25 bearings are Dura-Ace or Campagnolo Record quality.
Wheels Manufacturing Inc. Aluminum Headset Spacer Set
$12.99
Wheels Manufacturing 1-1/8 4-Piece Headset Spacer Kit includes an assortment of black anodized aluminum headset spacers for 1-1/8" fork steerers. Includes one each: - 2.5mm - 5mm - 7.5mm - 10mm
Wheels Manufacturing Inc. CN-R002 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Rear Left Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 15mm - 1 cone per bag - Note: O-ring / seal not included. Check the seal groove closely. This cone has a wider groove than cone CN-R024. COMPATIBLE HUBS: - Ultegra 6401 7-speed Rear - Ultegra 6402 8-speed Rear - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Wheels Manufacturing Inc. CN-R024 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 15mm - 1 cone per bag Note: O-ring / seal not included. Check the seal groove closely. This cone has a narrower groove than cone CN-R002. COMPATIBLE HUBS: - 105 FH-5700, 9 speed (right side cone) - 105 SC 1051, 7 Speed Rear - RX100 A551, 8 Speed Rear - RSX 410, 7 Speed Rear - Deore LX M550, 7 Speed Rear - Deore Mtn LX M550, 7 Speed Rear
Wheels Manufacturing Inc. CN-R036 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.5mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Road 400 CX Front - HB-RM40 Front - Shimano HB-RM40 Front - HB-RA50 Front
Wheels Manufacturing Inc. CN-R040 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.6mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Shimano HB-C201 Front - 105 HB-1050 Front - Deore LX/Mtn LX Front - STX HB-MC32/30 Front - Shimano HB-A410, HB-A416 Front
Wheels Manufacturing Inc. CN-R055 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - 22mm metal dust seal is pressed on cone - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 11.4mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Nexave HB-T400 Front - Shimano Deore HB-M510 Front - STX HB-MC32/30 Front - STX Parallax Front
Wheels Manufacturing Inc. CN-R060 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Right Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 9.5mm - 1 cone per bag COMPATIBLE HUBS: - Tiagra 4400, 9 Speed Rear - 105 SC 1056, 8 Speed Rear - 105 SC 1055, 7 Speed Rear - 105 SC 1051, 7 Speed Rear - RX100 A551, 8 Speed Rear - RSX 410, 7 Speed Rear - XT M737, 8 Speed Rear - XT-II M732, 7 Speed Rear - Deore LX M565, 8 Speed Rear - Deore LX/Mtn LX M550, 7 Speed Rear - STX-RC MC38, 8 Speed Rear - STX-RC MC30, 7 Speed Rear - STX MC32/33, 7 Speed Rear - Nexave IMC50, 8 Speed Rear - Alivio MC18, 8 Speed Rear - Alivio MC12, 7 Speed Rear - Acera-X MC290, 7 Speed Rear - Altus RM-40, 7 Speed Rear - FH-R080 Silent Hub, 8 Speed Rear - FH-R050 Silent Hub, 7 Speed Rear
Wheels Manufacturing Inc. CN-R063 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Left Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Cone Diameter: 17.0mm - Dust Seal Diameter: 25.5mm - Length: 16.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M737, 8-spd Rear - STX-RC MC38, 8-spd Rear - STX/STX-RC MC30/32/33, 7-spd Rear - Alivio MC18, 8-spd Rear - Alivio MC12, 7-spd Rear - Acera-X MC290, 7-spd Rear - Altus RM-40, 7-spd Rear - FH-R080 Silent Hub, 8-spd Rear - FH-R050 Silent Hub, 7-spd Rear
Wheels Manufacturing Inc. CN-R081 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech, Joy U, KK 10mm x 1, rear - Compatible with 10mm x 1 axle - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 13.8mm - 1 cone per bag COMPATIBLE HUBS: - Joytech, Joy U, KK 10mm x 1, rear - Taiwanese rear hubs with 10mm x 1 axle
Wheels Manufacturing Inc. CN-R082 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Sovos 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - Sovos 9mm x 1, front hub - Taiwanese and similar front hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R083 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R084 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech 9mm x 26, front hub - Compatible with 9mm x 26 axle - Cone Wrench Size: 13mm - Threads: 9mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Joytech 9mm x 26, front hub - Taiwanese hubs with 9mm x 26 axle - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Wheels Manufacturing Inc. CN-R085 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26 - Diameter: 17.0mm - Length: 13.8mm - Note: O-ring / seal not included. - 1 cone per bag COMPATIBLE HUBS: - JoyTech 10mm x 26, rear hub - Taiwanese hubs with 10mm x 26 axle
Page 1 of 79 Next page