Filter By:
- Bottom Brackets (93)
- Brakes/Levers/Pads (360)
- Cables (121)
- Cassettes/Freewheels (70)
- Chainrings (193)
- Chains (78)
- Cranksets (171)
- Derailleurs (137)
- Show More Categories
- Forks (49)
- Handlebar Grips/Tape (173)
- Handlebars (80)
- Headsets (100)
- Bicycle Pedals (161)
- Saddles (113)
- Seatposts (41)
- Shifters (79)
- Shift/Brake Combinations (47)
- Shocks (32)
- Stems (56)
- Tires/Tubes (688)
- Wheels (612)
- Other (679)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

- Works best on muddy tracks.
- Its DH Mud tread design, Magi-X DH rubber compound, Down Hill Shield casing and Cuttable Blocks technology allow you to excel in all wet conditions.

$0.25 - $32.29
Developed for short spokes with a large deflection angle.
DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use.
- Weight: starting at 59g for 64 nipples.

$0.25 - $0.75
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples

$0.75
Make it more aerodynamic – this nipple is hidden inside the rim.
DT Hidden Nipples are designed for high-profile rims, in which the inverted design is essential for optimum precision. They are very light and hidden on the inside of the rim: perfectly suited for high aero wheels. The nipples will align perfectly due to their spherical contact surface.
- Weight: 22g for 64 nipples

$0.75
DT Pro Head nipples are designed for short spokes with a large angle of deflexion such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to a homogeneous power transmission. The special shape of the head prevents the nipple of tilting in the rim base, which is a great advantage for wheel building. They are available with or without the patented DT Pro Lock locking system. Note: brass nipples are not approved for children’s products in the USA.

$0.99
This simple repair part is vital for getting bikes with side-pull caliper brakes safely back on the road.
- 6mm size

$0.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible.

$1.29
• Allows riders to connect seat packs to the Bontrager Nebula Plus saddles with flex form technology
• Plastic

$1.50
The buyer's choice for wheel builders looking to save weight.
ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond.
- Weight: starting at 20g for 64 nipples

$1.50 - $124.99
- ProLock: pre-prepped/treated nipple threads with special compound
- Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion
- Form-A design assures smooth fit and build
- Cold-forged nipple blank machined to DIN 79012 specs
- 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple)
- 2.0mm (14g) spoke thread interface with full run-through
- Made in Switzerland.
- Box/100

$1.59
Fittings for Jagwire hydraulic hose.
- Needle inserts to install Jagwire hydraulic hose with Shimano "low-pressure" type brakes
- Compatible with Shimano "J-Type" and older brake models

$1.99 - $2.99
Hose fittings for Hayes hydraulic disc brakes available a la carte.
Hayes brake compatibility:
- HFX-9
- Prime
- Sole
- El Camino
- Radar

$1.99
Jagwire's Cable Guide Stoppers are quality aluminum adapters that let you convert open-style cable housing stops on your bicycle frame so that they will hold 5mm-diameter standard cable housing sections.

$1.99
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

$1.99
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

$1.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

$1.99
Frame mounted barrel adjusters allow cable tension to be easily fine tuned.
- Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch
- Bag of 10

$1.99
Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

$2.00 - $171.99
- Double butted 2.0/1.8/2.0mm with cold forging technology
- Chrome nickel stainless steel with rolled threads
- 192g @ 32h/265mm
- Nipples sold separately

$2.39
Basics brake cables provide value on a budget.
- Double ended for compatibility with SRAM/Shimano road and mountain brakes
- Pre-stretched
- Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain
- Color: Silver
- Diameter: 1.6mm
- Length: 2795mm

$2.99
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments.

$2.99 - $3.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool

$2.99 - $4.49
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Page 1 of 140
Next page