Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Roof-Mount

Yakima Round CrossBar Pads
$49.99 - $64.99
If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang
Yakima Roundbar SL Adapter
$49.99
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Yakima Skybox Cargo Net
$54.99
Yakima's SkyBox Cargo Net makes it easy to keep your gear organized and protected inside a Yakima SkyBox (sold separately). Eight carabiners are included to easily attach the Cargo Net to the SkyBox's integrated track system.
Yakima Landing Pad
$64.99 - $129.99
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima Q Clip
$64.99
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima Universal Mighty Mounts (4-pack)
$64.99
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Yakima Fork Adapter
$74.99
Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.
Yakima Wheel Fork
$79.99
Free up precious cargo space and keep your vehicle's interior clean with Yakima's Wheel Fork. It securely holds one wheel and swings down when not in use. Universal snap-arounds allow the Wheel Fork to fit round and square crossbars, while its security tabs help your wheel stay in place even if your quick release loosens. And it even features a clever anti-spin device to stabilize your wheel.
Yakima Light Mounting Bracket
$84.99
- Heavy-duty steel brackets that accommodate lights of virtually any size or shape. - Sold in set of 2
Yakima Fairing
$99.99
Besides improving your vehicle's looks, the Yakima Fairing reduces wind noise and the amount of debris that strikes your bikes. Its sleek design fits most windshield angles and curvatures and is compatible with every Yakima tower. Plus, it's easy to install and a great place for your favorite bike stickers!
Yakima LightenUp Light Bracket Kit
$99.99
LightenUp your path-and easily secure your light bar or a pair of spotlights on your LockNLoad platform rack and Yakima T-slot crossbars. Configurable in 16 different orientations, this bracket provides peace of mind when you head out on nighttime adventures. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Configurable in 16 different arm-mounting orientations. - Supports up to an 18-lb. light bar or a pair of 9-lb. spotlights. - Max light bar length 52" long, max light bar depth 5.25" (including heat sink). - Heavy-duty steel construction, with a durable black-zinc coating. - Fits LockNLoad platform rack and perimeter rails, Yakima JetStream, FlushBar, RailBar, HD Bar T-slots, and most other T-slot equipped platforms and crossbars. - Also accommodates light bars that don't secure from the ends. - Holds lights with 6/8/10 mm hardware, using included torx head hardware for enhanced security. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 1.00 lbs - Dimensions: L 7.25in x W 2.00in x H 2.00in - Some assembly required, 30 minute install
Yakima LoadStop
$99.99
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
Yakima TopGrip OG
$99.99
Get your axes and shovels out of the backseat and up on top where they belong. Easy to use and super secure, the TopGrip OG is a smarter way to carry your long-handled gear. Attach it to either size OffGrid cargo basket, then secure your gear in the padded clamps. Voila! Your axe or shovel is out of the inside of your car, riding safely, securely, and away from the dangers of slamming doors and clumsy passengers. Paddle much? Use the TopGrip OG for paddles as well. Product Details: - OffGrid cargo basket accessory carries one axe, shovel or paddle up and out of the way - Double-padded clamps deliver a super-tight hold without damaging your gear - Fits just about any axe, shovel, paddle or other straight handled item from 30mm to 50mm in diameter - Carries items up to 9 lbs - Easily attaches to Medium & Large OffGrid cargo baskets - Add SKS (Same Key System) locks for added security (sold separately) - Sold as a pair to carry one axe, shovel, paddle or other long item Product Specs: - Weight: 0.93 lbs - Dimensions: L 4.25" x W 2.00" x H 3.25"
Yakima Mako Saddles
$100.00 $134.99 26% Off
Your boat will ride like royalty atop your roof with this easy-to-load saddle system. It's a stable ride on protective pads with Dynaflex" grips that hold snugly once the heavy-duty straps are tightened. Pair with a set of of HullyRollers for even easier loading. - Provides easy loading and a stable ride for your boat Pads protect the hull, and Dynaflex grips provide a snug hold when you tighten the straps - Each set includes one Heavy-Duty Strap and one Bow/Stern Tie-Down - Premium heavy-duty straps with coated metal buckles protect boat and vehicle Comes with two saddles per package - Add HullyRollers or another pair of Mako saddles (both sold separately) for optimal stability and ease - Fits rack systems with round and square crossbars - Fits factory and aerodynamic crossbars with Mighty Mounts - Supports one boat up to 80 lb - Minimum crossbar spreads of 24 inches\u001D or more
Yakima WheelHouse
$119.99
A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”
Yakima CrossBars
$129.99
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Yakima Windshield
$134.99 - $154.99
A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool
Yakima Ladder Roller
$139.99
Now racking up ladders, lumber and other lengthy gear supplies is a lot easier. Yakima’s new Ladder Roller attaches to our Truck Collection HD Bars and most any T-slot crossbar. - Steel brackets with durable black powder-coat finish for many years of use - Wide 24" (615mm) roller footprint for easy loading of a wide range of gear and equipment - Includes hardware for both our HD Bar and most T-slot crossbars - 75-lb. load capacity - Weight: 2.50 lbs - Dimensions: L 25.75in x W 4.75in x H 2.00in - Some assembly required, 5 minute install
Yakima Hullyroller
$140.00 $174.99 20% Off
Roll out on your next boat trip with these easy loading hull rollers. The Dynaflex" padded rollers protect and grip your hull, then lock into place once loaded. Fits many hull shapes with pivoting bases. - Includes 2 saddles per package; add another set of Yakima saddles or rollers to complete your custom loading system - Easy loading and unloading with U-shaped rollers - Features rollers mounted on pivoting bases that fit many kayak and canoe hull shapes - Dynaflex padded rollers protect and grip your hull, then lock into place once loaded - Fits Yakima round or square crossbars - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - Minimum crossbar spreads of 24 inches\u001D or more
Yakima Boa
$149.99
The Boa is a short-tray bike mount that fits a wider range of crossbar spreads (32 to 50 inches). It has a rotating wheel tray and a sleek fork block with Yakima's Locking Long-Throw Skewer, which clears most fork safety tabs.
Yakima EasyTop
$149.99
Super simple, the EasyTop is an instant roof rack. Strap it on top of almost any vehicle to carry up to 80 lbs of long, flat gear–from skis and snowboards to boats and surfboards. It installs in minutes–just loop it through the door frames and buckle it up. The thick padding protects your vehicle and your gear, and the double-latching buckle adds extra security. Traveling out of town? Bring it along and strap it to your rental vehicle. - Straps on top of almost any vehicle to create an instant roof rack - Carries us to 80 lbs of gear - Great for boats, boards, skis, ladders, and other long, flat loads - Thick structural padding protects your roof and your gear - Secures easily through door frames with integrated straps - Double-latching buckle adds security - Includes two Heavy Duty Straps and tie-down rope
Yakima LockNLoad Spare Wheel Holder
$149.99
Getting a flat's no problem when you secure a spare tire to the LockNLoad platform rack with this heavy-duty retention kit. The T-slot, drop-in style eyebolt hardware allows quick adjustment and removal. Sturdy stainless-steel ratchet straps take up the slack to hold most common size off-road tires in place for any adventure. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Holds 1 wheel with tire, up to 100 lbs. - Holds max tire size of 42 x 17R - Easily installs in minutes anywhere on your LockNLoad platform rack. - Includes heavy-duty hook straps with steel ratchets, cast-steel eyelets, and a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 3.20 lbs - Dimensions: L 7.00in x W 5.00in x H 2.00in
Yakima Q-Towers (pair)
$149.99
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima High Lift Jack Holder
$174.99
Be prepared with this heavy-duty bracket that keeps a high-lift jack accessible, and which conveniently mounts near the LockNLoad platform's perimeter. Easily installs in minutes and suitable for all common jacks. Add your own padlock to the integrated lock loop for greater security. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details - Securely carries 1 high-lift jack with a 50 mm steel standard bar up to 35 lbs. - Heavy-duty stamped steel construction, with a durable black-zinc coating. - Fits the LockNLoad platform rack and most other brands of T-slot equipped platforms. - Installs in minutes with an included 5 mm wrench. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Add your own padlock to the integrated lock loop for greater security. - Limited Lifetime Warranty. Product Specs - Weight: 6.50 lbs - Dimensions: L 7.00in x W 3.00in x H 8.00in
Yakima Corebar
$199.99 - $209.99
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Yakima LockNLoad Jerry Can Holder
$199.99
Now you can get out there even farther, by carrying extra fuel and water on the LockNLoad platform rack. The low-profile cage height makes it easy to load the can onto your platform, while heavy-duty ratchet straps keep it secure and rattle-free. Accepts 10L or 20L plastic or metal cans. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Holds 1 full 10L or 20L jerry water/fuel can made of metal or plastic, up to 45 lbs./25 kg. - Includes heavy-duty hook straps with steel ratchets, cast-steel eyelets, and a durable black-zinc coating. - Easily installs in minutes anywhere on the LockNLoad platform rack and most other T-slot equipped platforms, with an included 5 mm wrench. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 8.00 lbs - Dimensions: L 14.00in x W 7.50in x H 4.25in - Some assembly required, 15 minute install
Yakima HighRoller Bike Mount
$200.00 $289.99 31% Off
Yakima's HighLoader is a premium upright bike mount that accommodates nearly any bicycle, from sleek road bikes to 29ers with up to 3-inch-wide tires. It makes no contact with the bike frame itself, so it works great with disc brakes, full-suspension rigs and through-axles, and it's nice and easy to mount your bikes. It's also compatible with round or square crossbars, as well as factory and aerodynamic bars with Yakima's Mighty Mounts (sold separately). And it includes a dual-purpose, integrated cable lock that secures the bike to the rack, as well as the rack to the car so your stuff stays safe.
Yakima Drytop
$224.99
Weather resistant storage space that attaches quickly and easily to most vehicles, with or without roof racks. - Adds an additional 16 cubic ft. of storage.
Yakima OffGrid Extension - Large
$229.99
The OffGrid Extension adds 40% more capacity to your OffGrid cargo basket. Installation is easy—just plug it in, tighten it down, load it up, and hit the road. At 22" long, it frees you to bring another cooler, a box of firewood, or a couple more duffels. Fits Large OffGrid only. Product Details - Extension for the Large OffGrid cargo basket - Adds 22" in length - Made from durable, steel for years of rugged use - Simple installation with plug-in design - Compatible with Large OffGrid basket only Product Specs - Weight: 17.60 lbs - Dimensions: L 22.00in x W 49.00in x H 7.00in
Yakima OffGrid Extension - Medium
$229.99
The OffGrid Extension adds 40% more capacity to your OffGrid cargo basket. Installation is easy - just plug it in, tighten it down, load it up, and hit the road. At 18" long, it frees you to bring another cooler, a box of firewood, or a couple more duffels. Fits Medium OffGrid only. Product Details - Extension for the Medium OffGrid cargo basket - Adds 18” in length - Made from durable, steel for years of rugged use - Simple installation with plug-in design - Compatible with Medium OffGrid basket only Product Specs - Weight: 12.50 lbs - Dimensions: L 18.00" x W 40.00"x H 7.00"
Page 1 of 3 Next page