Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.
Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.
No longer will you have to decide between the turkey fryer, pop up tent, folding love seat, chef kitchen, dog tent, and a 128 capacity cooler. The Xtender adds 21 inches to the Vagabond X and comes with burly load bars for all your other toys. Leave nothing behind. - Comes with 2 load bars - Adds 21" to your Vagabond X - 160lb total load capacity - Makes Vagabond X 41" x 73" x 7" - Load bars measure 44"
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
- Versatile: Accommodates all 15mm & 12mm thru-axles. - Flexible: Adapter for most roof racks (Thule, Yakima, Kuat) - Quick Assembly: Easy mount on any flat surface - Fully Adjustable: Thumb screw inserts allow for instant adjustments - Construction: Lightweight aluminum and steel
The Boa is a short-tray bike mount that fits a wider range of crossbar spreads (32 to 50 inches). It has a rotating wheel tray and a sleek fork block with Yakima's Locking Long-Throw Skewer, which clears most fork safety tabs.
Besides improving your vehicle's looks, the Yakima Fairing reduces wind noise and the amount of debris that strikes your bikes. Its sleek design fits most windshield angles and curvatures and is compatible with every Yakima tower. Plus, it's easy to install and a great place for your favorite bike stickers!
$200.00 $289.99 31% Off
Yakima's HighLoader is a premium upright bike mount that accommodates nearly any bicycle, from sleek road bikes to 29ers with up to 3-inch-wide tires. It makes no contact with the bike frame itself, so it works great with disc brakes, full-suspension rigs and through-axles, and it's nice and easy to mount your bikes. It's also compatible with round or square crossbars, as well as factory and aerodynamic bars with Yakima's Mighty Mounts (sold separately). And it includes a dual-purpose, integrated cable lock that secures the bike to the rack, as well as the rack to the car so your stuff stays safe.
$140.00 $174.99 20% Off
Roll out on your next boat trip with these easy loading hull rollers. The Dynaflex" padded rollers protect and grip your hull, then lock into place once loaded. Fits many hull shapes with pivoting bases. - Includes 2 saddles per package; add another set of Yakima saddles or rollers to complete your custom loading system - Easy loading and unloading with U-shaped rollers - Features rollers mounted on pivoting bases that fit many kayak and canoe hull shapes - Dynaflex padded rollers protect and grip your hull, then lock into place once loaded - Fits Yakima round or square crossbars - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - Minimum crossbar spreads of 24 inchesor more
$100.00 $134.99 26% Off
Your boat will ride like royalty atop your roof with this easy-to-load saddle system. It's a stable ride on protective pads with Dynaflex" grips that hold snugly once the heavy-duty straps are tightened. Pair with a set of of HullyRollers for even easier loading. - Provides easy loading and a stable ride for your boat Pads protect the hull, and Dynaflex grips provide a snug hold when you tighten the straps - Each set includes one Heavy-Duty Strap and one Bow/Stern Tie-Down - Premium heavy-duty straps with coated metal buckles protect boat and vehicle Comes with two saddles per package - Add HullyRollers or another pair of Mako saddles (both sold separately) for optimal stability and ease - Fits rack systems with round and square crossbars - Fits factory and aerodynamic crossbars with Mighty Mounts - Supports one boat up to 80 lb - Minimum crossbar spreads of 24 inchesor more
Yakima's Q Stretch Kit enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It works with Q Towers.
Yakima's Railgrab Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory roof racks). The Railgrab Towers attach to your factory crossbars and they have die-cast components for a sturdy hold.
$30.00 $59.99 50% Off
Yakima's Universal Locking Skewer is a great way to secure your bike to a fork-mount bike rack (sold separately) so you can leave it on the roof without worry. It works with Yakima's SKS lock cores (Same Key System; sold separately) so that you only need to keep track of one key for all your rack-security needs.
Free up precious cargo space and keep your vehicle's interior clean with Yakima's Wheel Fork. It securely holds one wheel and swings down when not in use. Universal snap-arounds allow the Wheel Fork to fit round and square crossbars, while its security tabs help your wheel stay in place even if your quick release loosens. And it even features a clever anti-spin device to stabilize your wheel.
Thule's Gate Mate is made from heavy-duty vinyl with foam padding that protects both your bike and your truck's tailgate. Integrated Knock-Blocks prevent your bikes from sliding off the edge of the tailgate and causing damage to your vehicle and/or bike. Nylon straps keep the pad securely attached to your tailgate and anchors provide secure tie-down points for your bikes and other loads. And, you don't have to remove the pad to get to the tailgate's handle thanks to the convenient Handle Hood. The Small size is 54 inches for compact trucks, the Large is 62 inches for full-size trucks.
Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.
Previous page Page 2 of 2