Thule's Gate Mate is made from heavy-duty vinyl with foam padding that protects both your bike and your truck's tailgate. Integrated Knock-Blocks prevent your bikes from sliding off the edge of the tailgate and causing damage to your vehicle and/or bike. Nylon straps keep the pad securely attached to your tailgate and anchors provide secure tie-down points for your bikes and other loads. And, you don't have to remove the pad to get to the tailgate's handle thanks to the convenient Handle Hood. The Small size is 54 inches for compact trucks, the Large is 62 inches for full-size trucks.
Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.
Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
The Boa is a short-tray bike mount that fits a wider range of crossbar spreads (32 to 50 inches). It has a rotating wheel tray and a sleek fork block with Yakima's Locking Long-Throw Skewer, which clears most fork safety tabs.
Besides improving your vehicle's looks, the Yakima Fairing reduces wind noise and the amount of debris that strikes your bikes. Its sleek design fits most windshield angles and curvatures and is compatible with every Yakima tower. Plus, it's easy to install and a great place for your favorite bike stickers!
Yakima's HighLoader is a premium upright bike mount that accommodates nearly any bicycle, from sleek road bikes to 29ers with up to 3-inch-wide tires. It makes no contact with the bike frame itself, so it works great with disc brakes, full-suspension rigs and through-axles, and it's nice and easy to mount your bikes. It's also compatible with round or square crossbars, as well as factory and aerodynamic bars with Yakima's Mighty Mounts (sold separately). And it includes a dual-purpose, integrated cable lock that secures the bike to the rack, as well as the rack to the car so your stuff stays safe.
Roll out on your next boat trip with these easy loading hull rollers. The Dynaflex" padded rollers protect and grip your hull, then lock into place once loaded. Fits many hull shapes with pivoting bases. - Includes 2 saddles per package; add another set of Yakima saddles or rollers to complete your custom loading system - Easy loading and unloading with U-shaped rollers - Features rollers mounted on pivoting bases that fit many kayak and canoe hull shapes - Dynaflex padded rollers protect and grip your hull, then lock into place once loaded - Fits Yakima round or square crossbars - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - Minimum crossbar spreads of 24 inches\u001D or more
Your boat will ride like royalty atop your roof with this easy-to-load saddle system. It's a stable ride on protective pads with Dynaflex" grips that hold snugly once the heavy-duty straps are tightened. Pair with a set of of HullyRollers for even easier loading. - Provides easy loading and a stable ride for your boat Pads protect the hull, and Dynaflex grips provide a snug hold when you tighten the straps - Each set includes one Heavy-Duty Strap and one Bow/Stern Tie-Down - Premium heavy-duty straps with coated metal buckles protect boat and vehicle Comes with two saddles per package - Add HullyRollers or another pair of Mako saddles (both sold separately) for optimal stability and ease - Fits rack systems with round and square crossbars - Fits factory and aerodynamic crossbars with Mighty Mounts - Supports one boat up to 80 lb - Minimum crossbar spreads of 24 inches\u001D or more
Yakima's Q Stretch Kit enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It works with Q Towers.
Yakima's Railgrab Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory roof racks). The Railgrab Towers attach to your factory crossbars and they have die-cast components for a sturdy hold.
Yakima's Universal Locking Skewer is a great way to secure your bike to a fork-mount bike rack (sold separately) so you can leave it on the roof without worry. It works with Yakima's SKS lock cores (Same Key System; sold separately) so that you only need to keep track of one key for all your rack-security needs.
Free up precious cargo space and keep your vehicle's interior clean with Yakima's Wheel Fork. It securely holds one wheel and swings down when not in use. Universal snap-arounds allow the Wheel Fork to fit round and square crossbars, while its security tabs help your wheel stay in place even if your quick release loosens. And it even features a clever anti-spin device to stabilize your wheel.
Black replacement knobs for Bones 2 and Bones 3.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
$17.54 - $18.89
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
- Converts 1 ¼" Hitch Receiver to fit 2" Hitch - Compatible with all current Saris Hitch Racks (contact Saris for older model compatibility).
The Thule Xadapt 7 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
Thule's Load Bar End Caps are replacement end caps for rectangular load bars.
Long Wheel Replacement Straps (2 Pack)
The patent pending Cuscino, which is Italian for pillow, was designed by Fabio Pedrini to lovingly protect your bike during transit. It provides a rubber cushion for your ratcheting straps to add an extra layer of protection to your bike's frame. • Slips over ratchet straps to lovingly protect bike frame • Designed by Fabio Pedrini • Qty. 4 • For use with Freedom and Thelma hitch racks (each sold separately)
Thule's Accessory Strap Kit is a set of four rubberized, replaceable, ladder-style straps for use with many of Thule's bike racks and anti-sway cradles.
The Thule Xadapt 2 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.
$25.99 - $29.99
Evo's Fork Mount Carrier easily installs in your truck bed or anywhere else you need a simple fork mount carrier. The 15 and 20mm mounts use a Teflon sleeve to protect your axle, and the 9mm includes a QR skewer.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.
The Thule Xadapt 10 Adapter Kit makes it possible to connect Thule kayak carriers to Thule AeroBlade load bars. Please contact us with any questions regarding compatibility.
The Thule UpRide Fatbike Adapter lets you easily transport fat bikes on your UpRide rack. It fits bikes with tires up to 5 inches wide.
A fork hitch for bike transportation that allows for versitle mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: 15 x 110 mm (Boost, silver insert) 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) 15 x 142 mm (Salsa + others) 15 x 150 mm (Rock Shox Bluto Fork + others) 20 x 110 mm
Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).
• Pack includes 2 wheels straps and 2 road adaptors • The WS2 Thule Wheel Straps have a secure ratcheting buckle with a cam tightening mechanism.
- Powdercoated steel body with 9mm skewer & hole in handle for padlock
- Rigid 6061-aluminum body with 9mm skewer
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
$49.99 - $89.99
- Adapters for mounting suspension forks to most auto bike racks - Solution to thru-axle issues or clearance problems between disc brakes & trays
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Stretchable bungee surf straps secure different size surfboards, stand-up paddleboards, and sailboards to the vehicle roof rack for safe and secure transport. - Simple and easy to use cinching system keeps boards protected and stable during transit - Looped ends fasten securely around the vehicle’s load bars - No-fade UV resistant straps deliver long term durability
Thule's versatile Low Rider is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. Made of heavy-duty metal for strength and reliability, the Low Rider boasts a pass-through hole for locking your rig with a cable lock, too.
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.
Two heavy-duty straps with cam-action buckles secure heavy loads while our patented buckle bumpers help to prevent vehicle scratches and dings. - Each strap features steel cam-action buckles and protective Buckle Bumpers that fit snugly over buckles to protect vehicle and load at all times - Packaged as a pair - 15-foot length or 9-foot length
Secure an additional bike to your Saris Kool Rack 2-Bike (sold separately) with the Kool Rack Add-On. Each Add-On fits one bike and the Kool Rack can fit 2 additional bikes so you can carry a total of 4 bikes on all of your adventures.
With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.
An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes
Thule's Round Trip Case Rack Mounting Kit lets you easily mount your Round Trip hardshell bicycle case to your Thule roof rack (case and rack sold separately). The kit includes two heavy-duty load straps, protective rubber buckle bumpers, and weather stripping to seal your rack case against the elements.
Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key
Patented adapter design allows you to carry 15mm front suspension forks on existing Thule and most other fork-mounted bike carriers. - Patented adapter design allows use of current bike carrier - Durable materials and construction for added stability - Designed and manufactured in the USA - Welded steel body
$74.99 - $89.99
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
Fully lockable multipurpose holder for carrying paddles, oars, and masts. - Fully lockable holder for paddles, masts, oars, and other similar sized items. - Fits items up to 4 inch/10 cm diameter - Capacity to transport and lock multiple paddles - One Key System - can be locked, lock (1) sold separately - Equipment protection provided by rubber cushion - Fits Thule square, xsporter, rapid aero, and professional series bars, round bars, and most factory installed cross bars - Integrated cable secures items and deters theft of expensive paddles
Attaches to Bed-Rider (#822XT, sold separately) to increase bike carrying capacity - 1 One-Key lock cylinder included to lock the bike to the carrier - Simple, tool-free installation
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key
Swagman's RV Horizontal Bike Bag quickly and easily covers up to 2 bikes on a hitch-mounted rack. It's made of water-resistant polyurethane-coated nylon, and it has cinch straps and a large zip opening for a streamlined fit.
Two 13-foot or 10-foot locking straps with One Key locking cylinders. - Two locking straps - Steel cables inside a theft-resistant nylon sleeve provide a dual-layer locking system - Lightweight and corrosion resistant aluminum buckle - Lock housing rubber-coated to prevent vehicle and equipment scratches - Two One-Key lock cylinders included
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 8 locks, all using the same key
Fitting kit required for perfect fit of the roof rack to a specific car.
Page 1 of 3 Next page