Custom Yuba Bracket for attaching Yepp EasyFit child seats to the Mundo V3, V4, or Boda Boda V1 or V2. - Silver - Install on the rack with or without deck - Includes hardware - 2-Year Warranty - Not required for Spicy Curry, Mundo V5, Boda Boda V3
The Wahoo KICKR Desk is the desk for multi-tasking. Use it as an indoor cycling desk with your KICKR or as a standing desk in your office. It's fully adjustable to allow you to easily optimize for and switch between the following: - Standing - Sitting upright - Riding with hands on hoods - Riding in the drops - Riding in aero bars The desk has built-in tablet and smartphone stands and built-in holes to connect all your computer technology. A steel frame makes it sturdy and a slip-resistant surface will keep everything in place - no matter how much you sweat. - With the push of a button, you can lower or raise the desk to sitting or standing position. - Easily move the desk out of your sweat zone. The desk can roll through most doorways. - Get maximum stability and sturdiness with the formed steel tube frame and baked-on polymer finish. - Prop up and secure your tablet or smartphone in the desk and see your cycling app while on your KICKR or screen while working. - Keep all your technology untangled and out of the way with cord holes integrated into the tablet/smartphone stand. - Rubber mat keeps everything in place on the desk, no matter how much you are sweating or how hard you are working.
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
$84.99 - $94.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
With the disc extractor you can remove the aluminum disc on the side of your NEO Smart trainer in order to check the inside for residue and clean if necessary. This small tool is specially developed to open your NEO trainer yourself while staying within the terms of your warranty. The NEO disc extractor comes with three screws to fasten to your NEO. Use of this tool requires a 4mm Allen wrench, 5mm Allen wrench, and 24mm socket wrench.
Replacement roller belt for Tacs roller trainers.
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
$34.99 - $42.70
Keep your pants clean with SKS's Chainboard chain guard. This handy device bolts onto the chainstay and bottom bracket, and utilizes a telescoping design to fit a wide variety of frames.
Converts quill style forks to use threadless stems.
$6.99 - $7.99
This multifunctional storage bottle with wide filler-cap fits in standard bottle cages and allows you to conveniently carry tools or other ride accessories.
Park's Pizza Tool is the perfect gift for the cyclist who has it all. It's a quality pizza cutter reminiscent of classic highwheelers that has a blade sharp enough to slice through the roughest terrain. This great tool also includes a display stand and gift box. Never use a run-of-the-mill pizza cutter again.
$21.99 - $29.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection
$11.99 - $14.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 Extenders included for desired protection
The K-Edge Road Clamp Chain Catcher functions the same as the original chain catcher, but it mounts to its own CNC sculpted lightweight clamp. K-Edge's Road Clamp-on Chain Catcher improves overall function of your drive train while protecting your valuable frame from a dropped chain. - Prevents missed front shifts and frame damage from a dropped chain - For use with clamp-on front derailleurs - Clamps below and adjusts independently of the front derailleur - Precision machined, anodized 6061 T6 aluminum - 23 grams
When racing and riding, keeping your gear clean is the last thing on your mind; but when the ride ends and you don't want to track all that mud and dirt into your rig, the specially designed Fox seat cover will keep that shiny interior fresh and clean. Made using a waterproof main body fabric, the cover has multiple webbing straps that easily adjust to fit nearly any car or truck. They are easily removable when you get home and the waterproof fabric makes cleaning it a snap for your next adventure. - Protect your vehicle from mud and debris left over from the trail - Waterproof fabric protects your seats from anything you bring in from the trail - Adjustable webbing is designed to fit perfectly in any vehicle - Embroidered Fox Head on headrest
The Utility Changing Mat provides a clean surface to change into and out of your riding gear. It keeps your feet clean when gearing up and keeps dirt and mud contained when you gear down. Once you're ready, the bag simply folds into itself and cinches closed to hold your dirty gear encased and your car tidy. - Keeps your feet clean and dry while ensuring nothing gets left behind - Durable Nylon bag for carrying all of your gear to the trailhead - Converts into a large changing mat to keep your feet clean and dry - Quickly cinches back into a bag so nothing gets left behind
- Center mount - Made of alloy - Button type tool-free adjustments - Kickstand length 20 – 29-inches - Fits bikes with 24-inch to 700C wheels
- Stable 2-Stay mount - Made of alloy - Button type tool-free adjust - Fits wheels from 20-inches to 700C
Inspired by the design of the 1937 mudguard flap, Brooks' new mud flap is made of the same leather used for Brooks Saddles. It is provided with 2 screw bolts to fix it on the mudguard.
An adjustable, rear integrated kickstand that supports bikes of all sizes, from 24" to 29" wheels. Adjustable length fits more bikes Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. - Adjustable length fits bikes with 24-29-inch wheels - Compatible with Trek bikes equipped with integrated direct mount chainstays - Will not interfere with pedaling - Super strong and stable platform will hold your bike upright even with gear on the rack
Bontrager's Integrated Rear Mount Kickstand is compatible with Trek bikes equipped with integrated direct mount chainstays - Tuck-away design ensures it will not interfere with pedaling - It holds your bike up even with a load on the back, thanks to a highly-stable, direct-mount system.
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
- Clamps to the vertical tubing of SuperStands allowing for product description, pricing, specials, etc - Provides a high visibility advertising area without further shop clutter
- Add to older versions of the SuperStand to extend height to accept 29er wheels
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides. - Impervious to sweat and spilled water bottles. - Gripping texture keeps the KICKR in place, so you can focus on your ride. - Material helps to reduce noise and make the KICKR even quieter. - Beveled edge keeps the mat in line with the floor.
Goodbye, car. Hello, Range Boost! Select Trek electric bikes can now be fitted with Range Boost, an option that can double your e-bike's range so you can ride longer, commute farther, and take on bigger adventures. Product details - Go farther without worrying if you'll have enough battery power to get there - One key will give you access to your main battery, Range Boost, and bike lock - The system automatically manages power between batteries, so you don't have to - Compatible with select e-bikes with Removable Integrated Battery (RIB) systems - Expert installation exclusively at your Trek retailer
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart
Page 1 of 3 Next page