Parts & Accessories

$16.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
Not compatible with omega 300 and sentry aero 260 tail lights.

$13.99
In-vehicle charging adapter for charging USB rechargeable NiteRider lighting systems. Charging cable not included.
System Compatibility
- All Lumina Series
- Swift Series
- MiNewt Cordless Series
- MiNewt Mini Series
- Lightning Bug 120
- Sentinel
- Solas
- Omega
- Sabre
- Sentry Aero
- Stinger

$60.99
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm.
System Compatibility:
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems

$20.99
Lezyne's Aluminum Handle Bar Mount is a CNC-machined aluminum hard mount with a reinforced Composite Matrix cradle that securely holds the Mega Drive, Deca Drive, and XL LED lights. It is designed either for 25.4mm or 31.8mm bars, with the cradle designed to pivot 15 degrees of lateral adjustment to direct light where it is most needed. The hinged clamshell design provides a great grip that is ideal for large lights. A large thumb screw secures the AL mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine tune fitting to undersized bars. Aluminum Bar Mounts are sold separately and are not included with the Mega Drive, Deca Drive, or XL LED lights kit.

$14.99
Replacement lithium ion CR2032 batteries for use in the Femto LED lights.
SPEC: 700 mAh, 3.6V.

$4.99
Rear LED adapter for "D-Shaped" or flat seatposts found on select bicycles from manufacturers such as BMC, Giant and Specialized. Provides a stable, low-profile mounting surface for compatible LED lights.
Compatible LEDs:
- Laser Drive Rear
- Strip Drive PRO Rear
- KTV PRO Smart Rear
- Strip Drive Rear STVZO
- KTV PRO Rear
- KTV Drive Rear STVZO
- KTV Drive Rear

$5.99
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights

$119.99
Lezyne's Infinite Light Power Pack is a portable power pack that doubles runtimes of compatible Lezyne LED units. Compact, versatile design quickly and securely mounts to bars and frames. Integrated cable plugs directly into lighting systems. Power pack doubles as a backup USB charger for compatible USB rechargeable accessories. 20 Wh capacity. 14-inch cable with adjustable Velcro strap.

$4.99
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.

$6.99
This mounting strap is a replacement mounting strap for Lezyne's Year 10 Deca XXL and Super XXL LED lights (each sold separately).

$29.99
Lights, Camera, You Name it
The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back.
Features
- Omni-directional breakaway, 270 Degree Rotation

$9.99
CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.

$15.99
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

$29.99
Legendary CatEye reflector technology and white LED come together to provide eye-catching side visibility, ensuring your safety where accidents happen most. Intersection collisions are responsible for the majority of bicycle accidents, and the Orbit 2 provides dynamic motion visibility that headlights and safety lights alone just can't match. Installs easily to 24-29" wheels with 28-32 spoke counts. Don't let lack of side visibility make you a statistic; stay safe and seen with Orbit 2 spoke lights.

$9.99
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.

$5.99
Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

$29.99
This adjustable mount provides an infinite range of angles and positions for handlebar placement of your Transmitr Remote.
The unique CNC Aluminum design allows for convenient placement and sturdy mounting to handlebars from 31.8-22.2mm.
- CNC alloy design provides light and stable mount
- Allows for infinite angle adjustment
- Compatible with 31.8mm - 22.2mm bars
- For use with Transmitr Wireless Remote

$20.99
Where your gaze goes, your light follows
Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights.
- Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash

$26.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash

$12.99
Product details
- Easily integrate your Bontrager Flare tail light on your Madone 9 Series
- Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp

$6.59
Product details
- Perfect for mounting compatible Flare taillights to rear rack
- Includes a bolt and star washer for extra security
- Easiest to install with light installed for better leverage

$12.99
Key features:
- Securely attaches all Ion lights to bars
- Reduces vibration and slippage
- Compatible with 22.2-31.8mm diameter bars
- Mount rotates left and right for optimal placement

$8.49
Product details
- Compatible with USB rechargeable Flare taillights and all Ion headlights
- Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps
- Silicone body with a tooled adjustment clamp diameter
- When rotated for a Flare, the bracket is angled to compensate for an angled seat tube
- 25g

$12.99
Key features:
- Replacement InnerGlo LED light strips for select Bontrager Town clothing
- Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants
- Sold individually

$49.99
A compact remote with ANT+ wireless technology that allows for easy, on-bar control of your bike lights.
Bontrager Transmitr MicroRemote allows you to wirelessly control the functions of up to four Bontrager RT lights simultaneously. This sleek, compact remote communicates with your lights using ANT+ wireless technology, mounts easily to any handlebar, and can even be used in place of a bar end plug with an additional mount. Keep your light controls within reach!
- Communicates via ANT+ wireless technology
- Compatible with all Bontrager RT front and rear bike lights
- Can be paired with up to four lights simultaneously
- Wirelessly controls light functions, including on/off and mode selection, and signals battery status
- Easily mounts to handlebars, and can be used as a bar end plug (Bar End Mount sold separately)
- Double-press powers on all lights; single press changes modes
- Flashing LED when powered on indicates low battery in one or more connected lights
- Includes CR1632 battery, handlebar mount, and quick-start manual
- Battery: CR1632 (Coin)
- Weight: 12g

$64.98
Welcome to the future
The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights.
The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more.
- Transmitr remote can simultaneously control up to 7 lights
- ANT+ enabled for use with all Transmitr products
- Use Transmitr system for wireless on/off, mode selection, and more
- Can be used with multiple Flare RT lights for turn signal configuration
- Includes CR2032 battery, mount, and quick-start manual