Parts & Accessories
Lezyne's Infinite Light Power Pack is a portable power pack that doubles runtimes of compatible Lezyne LED units. Compact, versatile design quickly and securely mounts to bars and frames. Integrated cable plugs directly into lighting systems. Power pack doubles as a backup USB charger for compatible USB rechargeable accessories. 20 Wh capacity. 14-inch cable with adjustable Velcro strap.
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
NiteRider's patented mount is ideal for side mounting your Pro Series lighting system to your MX / full face helmet. The NiteRider Jawbone Mount for Pro Series is constructed of high strength materials and adjusts easily to fit most chin bars. System Compatibility - Pro Series Lighting Systems (All) Accessory Includes - Jawbone Mount for Pro Series (Lighting system sold separately)
For CubiCubi 1200 Lighthead - Cartridge battery - 1200 Lumens / 6000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt
For CubiCubi 850 Lighthead - Cartridge battery - 850 Lumens / 3000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable
A compact remote with ANT+ wireless technology that allows for easy, on-bar control of your bike lights. Bontrager Transmitr MicroRemote allows you to wirelessly control the functions of up to four Bontrager RT lights simultaneously. This sleek, compact remote communicates with your lights using ANT+ wireless technology, mounts easily to any handlebar, and can even be used in place of a bar end plug with an additional mount. Keep your light controls within reach! - Communicates via ANT+ wireless technology - Compatible with all Bontrager RT front and rear bike lights - Can be paired with up to four lights simultaneously - Wirelessly controls light functions, including on/off and mode selection, and signals battery status - Easily mounts to handlebars, and can be used as a bar end plug (Bar End Mount sold separately) - Double-press powers on all lights; single press changes modes - Flashing LED when powered on indicates low battery in one or more connected lights - Includes CR1632 battery, handlebar mount, and quick-start manual - Battery: CR1632 (Coin) - Weight: 12g
Pro Series Low Profile Helmet Mount (Not for Lumina Series Lights) System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip -TrailRat & TrailRat Select - RoadRat - Digital Patrol - Pre 2001 Systems
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
- Flexible mounting with non-slip Velcro straps or screws for the bottle holder device - Easy transport thanks to practical holder
This adjustable mount provides an infinite range of angles and positions for handlebar placement of your Transmitr Remote. The unique CNC Aluminum design allows for convenient placement and sturdy mounting to handlebars from 31.8-22.2mm. - CNC alloy design provides light and stable mount - Allows for infinite angle adjustment - Compatible with 31.8mm - 22.2mm bars - For use with Transmitr Wireless Remote
Legendary CatEye reflector technology and white LED come together to provide eye-catching side visibility, ensuring your safety where accidents happen most. Intersection collisions are responsible for the majority of bicycle accidents, and the Orbit 2 provides dynamic motion visibility that headlights and safety lights alone just can't match. Installs easily to 24-29" wheels with 28-32 spoke counts. Don't let lack of side visibility make you a statistic; stay safe and seen with Orbit 2 spoke lights.
Lights, Camera, You Name it The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back. Features - Omni-directional breakaway, 270 Degree Rotation
For CubiCubi 500 / 850 / 1200 - Charges two batteries simultaneously
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
- Elasticated Velcro strap provides many mounting possibilities - Diffused LED light provides 360 visibility - Built in passive reflective strips - Water-resistant - 2 Modes: Off Steady, On Flashing - CR2032 Battery (Included) - 75 Hour run time
Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Lezyne's Aluminum Handle Bar Mount is a CNC-machined aluminum hard mount with a reinforced Composite Matrix cradle that securely holds the Mega Drive, Deca Drive, and XL LED lights. It is designed either for 25.4mm or 31.8mm bars, with the cradle designed to pivot 15 degrees of lateral adjustment to direct light where it is most needed. The hinged clamshell design provides a great grip that is ideal for large lights. A large thumb screw secures the AL mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine tune fitting to undersized bars. Aluminum Bar Mounts are sold separately and are not included with the Mega Drive, Deca Drive, or XL LED lights kit.
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
- Can be used on arm, leg, backpack, or bike - 4-LED design for 360 visibility - Built-in passive reflective strips - Water resistant - Mode: Flashing Off - CR2032 Battery (included) - 75 hour run time - Sold individually
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
In-vehicle charging adapter for charging USB rechargeable NiteRider lighting systems. Charging cable not included. System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger
Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp
Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement
Key features: - Replacement InnerGlo LED light strips for select Bontrager Town clothing - Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants - Sold individually
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
The NiteRider Sentry Aero 260 Standard and Aero Seat Post Straps provide options for a proper and correct fitment onto standard and aero seat posts. Installation is easy with the loop around and hook design. - System compatibility: Sentry Aero 260 Daylight Visible Tail Light only - Includes: (1) Standard Seat Post Strap, (1) Aero Seat Post Strap - Standard Strap: 3.625" length with comfortable stretch to 5.5" length, fits 27.2mm seat post - Aero Strap: 5.5" length with comfortable stretch to 9" length, fits 30.9 or 31.6mm seat post
$8.75 $12.50 30% Off
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long
This mounting strap is a replacement mounting strap for Lezyne's Year 10 Deca XXL and Super XXL LED lights (each sold separately).
Replacement mounting strap for the new year 9 Hecto XL, Micro XL, Macro XL, Power XL.
The NiteRider Sentry Aero 260 Oversized XXL Aero Seat Post Strap provides a mounting option for a proper and correct fitment onto larger aero seat posts, commonly seen with popular TT Aero Road Bikes. Installation is easy with the loop around and hook design. - Includes: (1) Oversized XXL Aero Seat Post Strap - Compatibility Sentry Aero 260 Daylight Visible Tail Light only - Oversized Aero Strap Length, 7.25" length with comfortable stretch to 9" length - Fits 30.9 or 31.6mm diameter seat posts
Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
Attaches Blackburn Local Lights to any rack.
$5.50 - $5.99
Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g
Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
End Plug For Femto USB and Stvzo Femto USB Front
End Plug For Femto USB and Stvzo Femto USB Rear
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights
Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
Rear LED adapter for "D-Shaped" or flat seatposts found on select bicycles from manufacturers such as BMC, Giant and Specialized. Provides a stable, low-profile mounting surface for compatible LED lights. Compatible LEDs: - Laser Drive Rear - Strip Drive PRO Rear - KTV PRO Smart Rear - Strip Drive Rear STVZO - KTV PRO Rear - KTV Drive Rear STVZO - KTV Drive Rear
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
Page 1 of 2 Next page