Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Bontrager Quick Connect Light Brackets
$6.49
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
Bontrager Transmitr Remote
$64.98
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
Bontrager Flare Mount for Madone 9 Seatpost
$12.99
Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp
Bontrager Blendr Circuit MIPS Bike Helmet Mount Front
$26.99
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash
Problem Solvers Front Rack Light Mount
$11.99
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Bontrager Transmitr MicroRemote
$49.99
A compact remote with ANT+ wireless technology that allows for easy, on-bar control of your bike lights. Bontrager Transmitr MicroRemote allows you to wirelessly control the functions of up to four Bontrager RT lights simultaneously. This sleek, compact remote communicates with your lights using ANT+ wireless technology, mounts easily to any handlebar, and can even be used in place of a bar end plug with an additional mount. Keep your light controls within reach! - Communicates via ANT+ wireless technology - Compatible with all Bontrager RT front and rear bike lights - Can be paired with up to four lights simultaneously - Wirelessly controls light functions, including on/off and mode selection, and signals battery status - Easily mounts to handlebars, and can be used as a bar end plug (Bar End Mount sold separately) - Double-press powers on all lights; single press changes modes - Flashing LED when powered on indicates low battery in one or more connected lights - Includes CR1632 battery, handlebar mount, and quick-start manual - Battery: CR1632 (Coin) - Weight: 12g
NiteRider Tail Light Strap Mount
$16.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
Trek Speed Concept Seatpost Reflector/Flare Mount
$3.99
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
Lezyne CR 2032 Battery (2-Pack)
$5.99
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
Bontrager Flare Rack Quick Mount Kit
$6.59
Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
Bontrager Adjustable Transmitr Remote Mount
$29.99
This adjustable mount provides an infinite range of angles and positions for handlebar placement of your Transmitr Remote. The unique CNC Aluminum design allows for convenient placement and sturdy mounting to handlebars from 31.8-22.2mm. - CNC alloy design provides light and stable mount - Allows for infinite angle adjustment - Compatible with 31.8mm - 22.2mm bars - For use with Transmitr Wireless Remote
Lezyne CR 2032 Battery (8-pack)
$14.99
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
Lezyne End Plug - Femto USB R Drive
$5.99
End Plug For Femto USB and Stvzo Femto USB Rear
Lezyne End Plug - Y10 KTV Drive F/R
$5.99
Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.
NiteRider Sentry Aero Tail Light Standard/Large Seat Post Straps
$8.99
The NiteRider Sentry Aero 260 Standard and Aero Seat Post Straps provide options for a proper and correct fitment onto standard and aero seat posts. Installation is easy with the loop around and hook design. - System compatibility: Sentry Aero 260 Daylight Visible Tail Light only - Includes: (1) Standard Seat Post Strap, (1) Aero Seat Post Strap - Standard Strap: 3.625" length with comfortable stretch to 5.5" length, fits 27.2mm seat post - Aero Strap: 5.5" length with comfortable stretch to 9" length, fits 30.9 or 31.6mm seat post
Topeak CubiCubi 1200 Battery
$69.99
For CubiCubi 1200 Lighthead - Cartridge battery - 1200 Lumens / 6000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable
49°N 4-LED Reflective Snap On Band
$14.99
- Can be used on arm, leg, backpack, or bike - 4-LED design for 360 visibility - Built-in passive reflective strips - Water resistant - Mode: Flashing Off - CR2032 Battery (included) - 75 hour run time - Sold individually
Paul Component Engineering Gino Light Mount
$54.99
The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt
Bontrager Blendr MTB Ion Light Mount
$24.98
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes
Bontrager Blendr Saddle Accessory Mount
$7.99
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm
NiteRider Adjustable Angle Tail Light Strap Mount
$20.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
Lezyne LED Handle Bar Mount Adapter
$4.99
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
NiteRider USB In-Vehicle Charging Adapter
$13.99
In-vehicle charging adapter for charging USB rechargeable NiteRider lighting systems. Charging cable not included. System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger
NiteRider Lumina Helmet Mount
$30.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Lezyne End Plug - Femto USB F Drive
$5.99
End Plug For Femto USB and Stvzo Femto USB Front
Bontrager Town Stormshell Light Strip
$12.99
Key features: - Replacement InnerGlo LED light strips for select Bontrager Town clothing - Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants - Sold individually
Topeak CubiCubi 850 Battery
$54.99
For CubiCubi 850 Lighthead - Cartridge battery - 850 Lumens / 3000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable
Bontrager Flare Round Mounting Kit
$3.99
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
Blackburn Local Light Rack Mount
$5.99
Attaches Blackburn Local Lights to any rack.
CatEye Helmet Mount
$15.99
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Page 1 of 3 Next page