Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Stages Cycling Stages Dash Anywhere Mount
$15.99
On your stem? On your bar? Traveling and renting a bike? The Anywhere Mount has you covered. Quarter-turn style mount attaches anywhere with rubber o-rings. It mounts anywhere on the bike using 2 o-rings or a special attachment that allows the mount to be inserted in a standard quarter-turn mount like a Garmin. - For Stages Dash L10, L50 and M50 - Fits anywhere on the bike - Quarter-turn mounts
Stages Cycling Stages Dash GoPro Accessory Mount
$31.99
Mounts Dash and accessories using widely available GoPro connection. Lights? Camera? Action. - Mounts beneath compatible Stages Dash mounts using 3 screws - Has a hand-tighten screw for adjusting angle of GoPro-style mount attachments - For use with new Out Front, Integrated, Tri, Enve, and Lower Blendr Dash mounts
Stages Cycling Stages Dash 31.8mm Out-Front Mount
$62.99
This mount is among the lightest and most compact available, with a reliable metal-on-metal interface. By eliminating the quarter-turn fitment, we can mount the Dash close to the bar for a sleek, aerodynamic fit. Compatible with Stages Dash accessories, including GoPro, via three threaded holes beneath the mount. - Mounts to the right of the stem, holding the computer level to the bars and in front of the bike - Has a plastic clamp, which requires a 2.5mm allen key to tighten - Compatible with all Dash-specific accessories via 3 threaded holes underneath the main arm of the mount - For Stages Dash L10, L50, and M50 - Compatible with 31.8mm handlebars
Stages Cycling Stages Dash Over-The-Stem Mount For 31.8mm & 35mm Handlebars
$62.99
Place Dash behind the bar for improved visibility and better protection from mishaps on the trail. - Mounts to the left of the stem, holds the Dash above the stem and bars such that a crash will not break the Dash - Has a plastic clamp that requires 2.5mm allen key to tighten to handlebars - Has rubber spacer so the mount can be used on 31.8mm bars. No accessories can be bolted to the bottom of the mount. - For Stages Dash L10, L50, and M50 - Compatible with 31.8mm and 35mm bars
Stages Cycling Stages Dash Tri Mount
$62.99
This mount has accessory bolt holes on the bottom so it can be used with stages accessory attachments. - Mounts to the right TT bar, holds the dash in the center of the TT bars by tightening 2.5mm allen key head bolts - Can fit smaller 22mm bars using a rubber spacer (included) - Height, and therefore, bar clearance can be controlled by adjusting the pivot screw. - For Stages Dash L10, L50 and M50 - Compatible with 24mm and 22mm aero extensions - Fits a wide range of aero bars and includes a pivot for multiple placement options and ideal viewing angle
Stages Cycling Stages Dash—Cadence Sensor
$62.99
Stages magnet-free Cadence sensors fit to your crank arm and rear hub to provide real-time, accelerometer-based cadence data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most crank arms - Installs/removes in seconds - IPX7 Water-resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 18-200 rpm - Blue and red LEDs indicate pairing, activation, and low battery status
Stages Cycling Stages Dash Blendr Mount, Lower
$70.99
This mounts specifically to the Blendr system supported by Trek, which is similar to a GoPro interface. Featuring an accessory bolt hole pattern, it can be used with Stages accessories. - For Stages Dash L10, L50 and M50 - Fits Blendr-compatible stems - Works with Stages accessories, including GoPro attachment
Stages Cycling Stages Dash Blendr Mount, Upper
$70.99
This mounts specifically to the Blendr system supported by Trek, which is similar to a GoPro interface. - Designed to mount Dash above additional accessories or to the Blendr stem with a bottom attachment - For Stages Dash L10, L50 and M50 - Fits Blendr compatible stems
Stages Cycling Stages Dash Integrated 2-Bolt Out-Front Mount
$70.99
This mount fits most integrated bar/stem designs with a two-bolt interface below stem. - Mounts to a 2-bolt pattern (parallel to the direction of a stem) integrated handlebar (bolts not included) - Holds the dash level to the bars and in front of the bike. - For Stages Dash L10, L50 and M50 - Fits Shimano PRO and some Canyon integrated bars
Stages Cycling Stages Dash Top Cap Mount
$70.99
Attaches Dash to steer tube beneath top cap. Great for mountain bikes and setups with minimal handlebar space. - Mounts to the top cap of a bike by replacing a headset spacer - Angle can be controlled by loosening and tightening the pivot bolt - For Stages Dash L10, L50, and M50 - Fits all 1-1/8" headsets with room for a spacer over the stem
Stages Cycling Stages Spindles
$99.99
The Stages Spindles "G" bottom bracket spindle allows the retrofit of the carbon Stages Power meter for SRAM BB30 DUB MTB cranksets. The spindle is manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with SRAM DUB MTB. The Stages Power meter 30mm spindle is specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retrofit of the new carbon Stages Power Meter to a rider's SRAM drivetrain. - Spindle only
Page 1 of 1