Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Shimano BMDN100 Di2 Long Battery Mount for External Wiring
$184.99
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
SRAM QuickView Adaptor
$6.49
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
SRAM eTap BlipClamp
$22.99
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
SRAM eTap BlipGrip
$29.99
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
SRAM eTAP Battery Charger
$71.99
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTap Battery
$84.99
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
SRAM RED eTap Blips
$156.99
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
SRAM RED eTap Bar End Clic Shift Buttons
$170.99
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
SKS COMPIT Cover iPhone 6+/7+/8+
$25.99
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6+/7+/8+
SKS COMPIT Cover iPhone 6/7/8
$25.99
COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6/7/8
SKS COMPIT Universal-Cover Adapter
$25.99
COMPIT Universal-Cover Adapter (or COMPIT Phone Covers) are needed to securely mount the phone to the COMPIT unit. The adapter with the special mounting device allows the phone to be docked into the COMPIT system. The cover attaches to the user's favorite phone case with self-adhesive 3M film.
SKS Compit/E
$39.59
Developed especially for e-bikes with Bosch Intuvia/Nyon displays, the Compit/E smartphone holder is adapted so that the smartphone and board computer form a closed unit on the handlebar. With a twist, you can attach your smartphone horizontally or vertically thanks to the oversized bayonet mount, and can move it into the desired position by adjusting the angle. - NOTE! Requires smartphone cover (sold separately)
Rokform Samsung Galaxy Bike Mount
$124.99
Rokform's Samsung Galaxy Bike Mount is a rock solid system that is completely adjustable, offering stable, safe, and completely hands-free visibility and access to your Samsung Galaxy. Rokform's CNC-machined aluminum-billet case provides a light, tough landing pad for your phone. And, their Universal V.3 Bike Mount replaces your stem cap to quickly attach to any 1-1/8-inch fork. The mount's viewing angle adjusts from -22 to +55 degrees, so you're sure to find the perfect perspective. The included safety lanyard offers another layer of security for your phone. The kit also includes Rokform's V.3 Magnet Kit, which lets you stick your phone to any magnetic surface, and their RokSack all-weather protective cover. Samsung Galaxy Bike Mount for S3, S4 and S5 includes: • Machined 6061 T-6 aluminum billet phone case • Universal V.3 Bike Mount • V.3 Magnet Kit • RokSack weather-guard protective cover • Dual retention locking system
Rokform iPhone Bike Mount
$124.99
Rokform's iPhone Bike Mount is a rock solid system that is completely adjustable—offering stable, safe, and completely hands-free visibility and access for your iPhone. Rokform's CNC-machined aluminum-billet case provides a light, tough landing pad for your phone. And, their Universal V.3 Bike Mount replaces your stem cap to quickly attach to any 1-1/8-inch fork. The mount's viewing angle is adjustable from -22 to +55 degrees, so you're sure to find the perfect perspective. The included safety lanyard offers another layer of security for your phone. The kit also includes Rokform's V.3 Magnet Kit, which lets you stick your phone to any magnetic surface, and their RokSack all-weather protective cover. iPhone Mount for 6, 5/5s, 5c, 4/4s includes: • Machined 6061 T-6 aluminum-billet phone case • Universal V.3 Bike Mount • V.3 Magnet Kit • RokSack weather-guard protective cover • Dual retention locking system
Profile Design UCM XL Universal Computer Mount 60mm
$17.99
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Pro Steerer-Mounted Di2 Battery Holder
$16.99
• To position the Shimano Di2 battery inside the fork steerer • Including stainless steel tool to remove the set.
Pro Vibe Aero Race Mount
$97.99 - $109.99
The Vibe Aero Race Mount is designed for the PRO Vibe Aero handlebar/stem combination. Made of high-quality CNC machined 6061-T6 Aluminum, it fits all Pro handlebar/stem combinations. - Compatibility (Regular): GARMIN 820, 520, 25, 20 - Compatibility (XL): GARMIN 1030, 1000, 820, 520, 25, 20 - Lifetime Guarantee - Weight: 30g
Polar CS-Series Cadence Sensor
$44.99
Polar's CS-Series Cadence Sensor lets you view your pedaling rate displayed in revolutions per minute (RPM). This helps you ride efficiently and pace yourself.
Paul Component Engineering Stem Cap Light Mount
$70.99
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
Lezyne Direct X-Lock GPS Mount Insert
$4.99
Replacement GPS mount insert for the Direct X-Lock Mount System and the Alloy CNC Forward Mount.
Lezyne GPS O-Ring Set
$5.99
Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size
Lezyne GPS Watch Handlebar Adapter
$19.99
Attach your Lezyne Micro GPS Watch (sold separately) to your 31.8mm handlebar for easy viewing with this quick-mounting adapter.
Lezyne Direct X-Lock Mount System
$59.99
Versatile GPS and accessories forward mount. Multiple mounting options to maximize GPS and accessories placement. Composite matrix construction with aluminum arms. Bolts directly to stem faceplate. Lezyne X-Lock and GoPro mount compatible. Includes mounting hardware. - Direct X-Lock Mounting System not compatible with all stems.
No Image
$79.99
Super-compact and lightweight magnet-less cycling speed sensor. Translucent Composite Matrix construction with LED indicator. Simple installation that mounts to most hubs. High-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Features a replaceable CR2032 battery. - Weight: 11g - Dimensions: 37 x 33 x 13mm
No Image
$99.99
Super-compact and lightweight magnet-less cycling sensors. The pair includes the Pro Speed Sensor (hub mounted) and the Pro Cadence Sensor (crank arm mounted). Both feature a translucent Composite Matrix construction with a LED indicator. And each has a high-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Replaceable CR2032 battery included. - Weight: 11g - Dimensions: 37 x 33 x 13mm
K-Edge Replacement Garmin Insert Kit
$9.99
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
K-Edge Combo Mount Interface
$27.99
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.
K-Edge NiteRider Adapter
$32.99
This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams
K-Edge Fixed Garmin Stem Mount
$39.99
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge Gravity Top Cap Mount
$39.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.